Testile Testing Equipment

The electronic Fabric Tensile Tester operation function introduction Electronic Fabric Tensile Tester has many types of models, the following is the electronic Fabric Tensile Tester operation.     Multi-functional electronic Fabric Tensile Tester can be used with different fixture auxiliary tools to achieve different functions, mainly for a variety of textile fracture tensile, tearing, peeling, bullet top breaking, fixed elongation, fixed load repeated stretching, stitch slip, seam strength, single yarn strength, grab sample strength, compression function, combined strength, shoe heel combined strength and other mechanical properties testing, and wide construction building materials It can test the force, elongation and deformation of tensile, peeling, tearing, top-breaking, bending, bonding and creep tests of building materials, aerospace, machinery manufacturing, wire and cable, rubber, plastic, home appliances and geotechnical materials. It is the ideal testing equipment f...

Medical mouth mask flame retardant property tester operation process Medical mouth mask flame retardant property testerInstrument characteristics： 1. The mask fixture is a metal human head mold, which can simulate the actual use situation of the mask. 2. The burner is equipped with a combustible gas interface, such as propane (liquefied gas). 3. Burner height is adjustable. 4. Burner could be timing and positioning automatic. 5. Burning time and flame retardant time are automatically recorded and displayed digitally 6. Mask Flame Retardant Tester is equipped with flame temperature measuring probe and flame temperature display. Medical mouth mask flame retardant property tester operation process: 1. Plug in the power socket on the back cover of the instrument to turn on the power supply, connect the air inlet to the propane bottle, and open the gas bottle valve to connect to the gas source. 2. Close the front door of the combustion test chamber, and put the "power" switch to t...

About ASTM D5171 Button Impact Tester   Important Points 1. Start the Safety Shoe Impact Tester. Click the [Up Button] on the control box to lift the impact head. To the proper position, click the [Down Button] to stop.   2. Click [Left Button] to lower the anti-secondary impact device. Install the toe sample of the safety shoe. Tighten the screws to secure the fixture to the sample to ensure that the sample does not move.   3、Put the playdough into the mold to make a cylinder. Place the playdough cylinder on the inside of the toe in this position. Adjust the height of the impact head using the handle at the bottom left. Make the impact head just touch the sample. 4. Press [Zero] and [Unit/O-L] simultaneously to clear Length. click [Menu] and [Down Button] to select the test height.   5. Click the arrow keys to set the test height. When the height setting is complete, click [Start/Enter] to confirm. Click [Esc/Stop] to exit.    6. Click the arrow keys to se...

The Best Ways to Utilize Cone Calorimeter The Cone Calorimeter method has been applied in many fields of research because of its advantages of low influence of external factors and good correlation with the results of large experiments. The Best Ways to Utilize Cone Calorimeter: 1.Preparation of specimen The actual radiation area of the specimen is 88.4 cm2 when the outer frame of the specimen box is used; when the outer frame of the specimen box is not used... 2. Radiation cone preheat Turn on the radiation cone power supply on the equipment, and start the radiation cone preheat. Preheating to close the heat insulation gate, and put... 3. Test conditions set Wait for the temperature of the heating cone and the test conditions close to the time, click the software to start the test button. In the test... 4. Operation during the test First, without placing the specimen, click on the software to start the baseline acquisition. Wait at least one hour for this step.

Tearing Strength Tester control panel function analysis Tearing Strength Tester control panel functions are introduced： 1. Reset key - for system initialization and the system died when the recovery function. 2. paper walking key - used to control the printer paper walking, press this key printer paper running, and then press to stop the paper walking. Press and hold this key during the printing process to stop printing. 3. Print key - used to control the printout function. 4. Range selection key - for measuring range gear conversion. 5. Friction angle calibration key - for the calibration of friction angle and swing parameters. 6. Standard deviation key - for extracting and displaying the standard deviation of a group of test results. 7. Quantitative setting key - used to set the sample quantitative, and according to this to calculate the tear index. 8. Layer setting key - used to set the number of layers of specimen and calculate the tearing value of single layer specimen accordingly...

Textile Woven Bag Tensile Testing Machine Technical Information Fabric Tensile Strength Tester  is suitable for testing the tensile strength, tensile strength, tear strength, tearing strength, top breaking force and other physical properties of gloves, bags, woven bags, flexible packaging, non-woven fabrics, paper, film and other materials. Due to space limitations, we will briefly understand the concept of several of the test items. Tensile strength refers to the tensile test, the test until fracture, the unit of the initial cross-section of the large tensile load. When using the instrument to test the tensile strength of the sample, you can get the tensile breaking stress, tensile yield stress, elongation at break and other data together.

What physical properties of textiles are tested by textile testing instruments? Textile testing instruments is a kind of physical property testing instruments used in the field of textile science and technology,. What physical data can textile testing instruments be used to test? 1、Hydrostatic pressure Outdoor fabric industry is customarily called water pressure, the unit with mmH2o said, refers to the unit area to withstand water pressure strength, in standard laboratory conditions, the fabric to withstand the pressure of distilled water sprayed upward, and record the water pressure value, such as water pressure 5000mmH2o, that is, the unit area can withstand 5m pressure without leakage. Hydrostatic pressure tester is used to determine the water resistance of medical protective clothing, compact fabrics such as canvas, tarpaulin, thatch, tent cloth, rainproof clothing cloth and other materials. 2、Breathability Air permeability means the performance of air through the fabric. Under th...