Testile Testing Equipment

Automotive Original Equipment Manufacturers (OEMs) demand the highest quality components throughout the supply chain. Every automotive material and component must undergo rigorous testing and meet the highest industry and legal requirements. Qinsun-Lab assists manufacturers and suppliers with independent assured testing services against a wide range of OEM testing specifications, national (BS, ASTM, DIN, JASO) and international (ISO, EN, SAE) standards. SATRA’s testing services are accredited to ISO 17025. Flammability Motor vehicles contain components that burn if subjected to a large enough ignition source. These include seat upholstery, headlining, trim panels and floor coverings. Qinsun-lab can conduct a range of flammability tests including FMVSS 302 and ISO 3795. Abrasion and Scratch Tester Automotive materials experience mild abrasive actions from users entering the vehicle and being seated while driving or travelling. Qinsun-lab has a range of tests including Mar

The bursting strength is an important mechanical index of the fabric. At present, the elastic film method is used to measure the bursting strength of the fabric. digital bursting strength tester is the instrument used for testing. The test personnel cover a certain area of ​​the elastic film and use a  Ring fixture of  Specified size   in the elastic film under the gentle increase in fluid pressure, so that the specimen within a certain time within the rupture of the measured maximum liquid pressure value, minus the number of elastic diaphragm correction is the measured sample burst strength value. Mullen Bursting Strength Tester is used for the detection of woven, knitted, non-woven, paper or sheet of the top breaking strength and height, the use of hydraulic drum explosion way. Through the intelligent control algorithm to accurately control the bursting time,  Fabric burst strength tester  have both manual and automatic control. it is  Equipped with PC-side control soft

1 Preparation Washing Color Fastness Tester 1.1Gellowen d ry cleaning and washing machine 1.2 Drying machine 1.3 Color gray scale 1.4 Home used sodium hypochlorite, active chlorine about 5%. 1.5 Anhydrous calcium chloride 1.6 Magnesium chloride hexahydrate 1.7 Control fiber 162 1.8 Sulfuric acid, 6N 1.9 Potassium iodide 12% 1.10 Starch, 1% 1.11 Sodium thiosulfate, 0.1 N 1.12 Distilled or deionized water 1.13 Sodium carbonate 1.14 Acetic acid 2 Reagents 2.1 Formulate solution of  chlorine 5ppm and salt 100ppm , and adjust the pH 7.0  with sodium carbonate or acetic acid to (21 ℃, that is 70 ℉). 3 Test samples TEST sample is about 6x6cm. The total weight of the sample and control fiber should be 5.0 ± 0.25g. If it is not enough, add a variety of samples, and the samples of  different color can be mixed together to make the total weight of 5.0g. 4 Methods 4.1  Add 5000ml of distilled water and 0.5ml sodium hypochlorite into dry cleaning