跳至主要内容

Test Process Of Digital bursting strength tester

The bursting strength is an important mechanical index of the fabric. At present, the elastic film method is used to measure the bursting strength of the fabric. digital bursting strength tester is the instrument used for testing. The test personnel cover a certain area of ​​the elastic film and use a Ring fixture of Specified size in the elastic film under the gentle increase in fluid pressure, so that the specimen within a certain time within the rupture of the measured maximum liquid pressure value, minus the number of elastic diaphragm correction is the measured sample burst strength value.

Mullen Bursting Strength Tester is used for the detection of woven, knitted, non-woven, paper or sheet of the top breaking strength and height, the use of hydraulic drum explosion way. Through the intelligent control algorithm to accurately control the bursting time, Fabric burst strength tester have both manual and automatic control. it is Equipped with PC-side control software, simple operation. The test results of bursting strength testing can be analyzed and printed data to support all the standard requirements of the test area, fully meet the requirements of different standards.

Fabric Burst Strength Tester Test process:Select the different equipment and different test methods, the sample burst strength results are also different. GB / T7742.1-2005 in the provisions of the burst time can be used (20 ± 5) s; test area of ​​50cm2, can also use 100cm2, 10cm2, 7.3cm2 and other test area; FZ / T01030-1993 specified hydraulic speed (85 ± 10) mL / min.Assuming that the three factors of the selected test area, test conditions and equipment are subjected to a single factor test, the average of the results of each sample is analyzed and compared. Among them, the test area is selected as 7.3cm2 and 50cm2; the test conditions are selected as the oil pressure rate 95mL / min and the fixed burst time 20s; the equipment is selected as MULLENC type burst strength tester and M229AUTOBURST type burst strength tester.
标签：

评论

  1. universal testing machine2018年5月29日 03:30


    Find here details of companies selling Melt Flow Index Tester, for your purchase requirements. Get latest info on Melt Flow Index Tester, suppliers, manufacturers, wholesalers, traders with Melt Flow Index Tester prices for buying.
    http://www.universalmaterialtestingmachine.com/plastic-melt-flow-index-tester-p351.html

    回复删除
  2. Yannis2018年6月3日 19:34

    Bursting Strength Tester is used to test the strength of bursting for fabric. When you do the bursting test, if you want to know more plz click:
    <a href="http://www.testextextile.com/product/bursting-strength-tester-tf142ab/>Bursting Strength </a>

    回复删除

发表评论

此博客中的热门博文

Multi-Functional Scratch tester For automotive interior materials

          Multi-Functional Scratch tester is applicable to all types of wiping performance test of automotive interior materials; test equipment integrated three domestic standards (fingers scraping method, a hundred grid method, and plastic scraping finger scraping method).         Scratch tester is an electronic instrument capable of measuring critical load, adhesion, scratch resistance and bond strength for a wide range of surfaces. Scratch tester measures the scratch resistance of a sliding and moving surface in the relative motion to a stylus. The stylus is forced/pressed against the moving surface with precise controlled force which is normal to the surface and tangential force at the contact has to be measured.         Scratch tester can be utilized for all type of industrial coating from the plasma layers used in semiconductor and optical technology used in decorative coatings used for automotive and consum...
发表评论
阅读全文

Reveal the standards for textile breathability testing and let you understand it in seconds!

 Reveal the standards for textile breathability testing and let you understand it in seconds! Breathability testing is a measure of how much gas can pass through a textile. However, there is no single "optimal" air permeability value, as it depends on the specific circumstances in which the textile is used. For example, if it is used to make sportswear, it is hoped that it has good breathability; if it is used to make insulating clothes or warm clothes, it is hoped that it can block the cold well. Therefore, when testing the air permeability of textiles, the purpose of using the textile must be clearly understood in order to obtain reasonable values. In order to accurately and quickly test the true breathability performance of a sample, specially designed and developed instruments must be used. Testing methods generally include: fabric thickness (Thickness), fabric density (Density), fabric water absorption rate (Water Absorption Rate), evaporation and mass transfer (Moistur...
发表评论
阅读全文

Test Methods of Universal Pilling Assessment Viewer (PAV)

Universal Pilling Assessment Viewer enables fabric to be assessed while still mounted on a Martindale head. The Pilling Assessment Viewer (PAV) for the textile market has been developed with the help of a major textile company in accordance to BN EN ISO 12945 standards incorporating all 3 parts and adopting the following test methods: Part 1: ICI Pilling box method (BS 5811) Part 2: Modified Martindale method (SN 198 525) Part 3: Atlas random tumble method (ASTM D 3512-96) It uses D65 Artificial Daylight (with CWF optionally available), as specified by many retailers. Other test methods can also be viewed, including those specified by major retailers. Other results of test methods that can be viewed include: BS 5811:1986 Determination of resistance to pilling and change of appearance of fabrics. ICI modified pill box for snagging Fleece appearance and surface change after washing Other test methods as specified by several major retail outlet. To optimize c...
1 条评论
阅读全文