Testile Testing Equipment

Color fastness to washing is the common quality parameter, which is considered very important from the point of view of consumers. This test determines the loss & change of colour in the washing process by a consumer and the possible staining of other garments or lighter portion that may be washed with it. The color fastness testing to washing  First, the purpose and principle: 1, this test method is applicable to the detection of conventional home or commercial washing process for home textiles washable color fastness 2, this test method for washing color fastness test for does not reflect the conventional commercial washing process added by the utility of brighteners. 3, a single wash test (STest) results with a home or commercial wash effect. Second, the preparation before the experiment: Cut the sample size of 40mm100mm and multi-fiber cloth, and along the sample and a short edge of the multi-fiber cloth and the multi-fiber cloth face to face sewing toge...

Shoes with leather friction fastness method summarized into three kinds of reciprocating wool felt friction leather; reciprocating white lining cloth friction leather; fixed point rotating wool felt friction leather. Rotary wool felt friction method is with the diversification of shoe design, multi-block splicing shoes more and more, in the shoes can not get enough long sample, and to detect the end-use of shoes adaptability, Taken by. However, the results of the friction test of rotary and reciprocating wool felt are not consistent and the method to be used in the Leather Color Fastness test results.  Reciprocating wool felt rubbing the leather method to maintain the continuity of quality control, so that the raw material leather to make shoes leather using a relatively consistent test method, the results are comparable. Currently using more. Dry wipe: the use of the sample face up, into the sample folder should be stretched, not wrinkle. The specimen holder is cla...

abrasion resistance is one of the important performance of denim clothing, but also the production enterprises and consumers are mainly concerned about the indicators.  Poor wear resistance of clothing, easy to wear after wearing, affecting the use of the product cycle. At present, FZ / T81006-2007 "denim clothing" standard for the detection of wear resistance is mainly used GB / T 21196.2-2007 "Textile Martindale fabric abrasion resistance of the second part: the determination of sample damage"  The principle is to cut a representative sample on the denim clothing, placed on the  Martindale wear tester , in the specified load and speed, the trajectory for the Lissajous (Lissajous) graphics plane motion and abrasive  Friction, the specimen holder can be free to rotate about the center axis perpendicular to the horizontal plane. Two or more non-adjacent yarns were completely broken, the test was terminated, and the  abrasion resistance  of the ...

1 Scope :Textiles Combustion Performance Test Vertical Method This standard specifies the test method for the determination of the flame retardancy of various flame-retardant textiles for the purpose of determining the tendency of textiles to continue burning, smoldering and carbonizing. This standard applies to the determination of flame retardant fabrics, knitted fabrics, coated products, laminated products such as flame retardant properties.   2, reference standard: The following standards contain provisions which, by reference in this standard, constitute provisions of this standard. At the time of publication of this standard, the versions shown are valid. All standards will be revised and the parties using this standard should explore the possibility of using the latest version of the following standards. GB 6529-86 Standard atmosphere for humidity control and testing of textiles   3, textiles combustion performance test vertical method definition This standard ...