abrasion resistance is one of the important performance of denim clothing, but also the production enterprises and consumers are mainly concerned about the indicators. Poor wear resistance of clothing, easy to wear after wearing, affecting the use of the product cycle.
At present, FZ / T81006-2007 "denim clothing" standard for the detection of wear resistance is mainly used GB / T 21196.2-2007 "Textile Martindale fabric abrasion resistance of the second part: the determination of sample damage" The principle is to cut a representative sample on the denim clothing, placed on the Martindale wear tester, in the specified load and speed, the trajectory for the Lissajous (Lissajous) graphics plane motion and abrasive Friction, the specimen holder can be free to rotate about the center axis perpendicular to the horizontal plane.
Two or more non-adjacent yarns were completely broken, the test was terminated, and the abrasion resistance of the fabric was determined according to the total number of times the sample was worn. In the daily testing process, FZ / T 81006-2007 "denim clothing" on the denim wear resistance made a clear request, the nominal pressure of 9kPa, denim fabric unit area quality in 339g / m2 above, wear resistance requirements ≥ 25000 times , The unit area of the quality of 339g / m2 below, wear resistance requirements ≥ 15000 times.
At present, FZ / T81006-2007 "denim clothing" standard for the detection of wear resistance is mainly used GB / T 21196.2-2007 "Textile Martindale fabric abrasion resistance of the second part: the determination of sample damage" The principle is to cut a representative sample on the denim clothing, placed on the Martindale wear tester, in the specified load and speed, the trajectory for the Lissajous (Lissajous) graphics plane motion and abrasive Friction, the specimen holder can be free to rotate about the center axis perpendicular to the horizontal plane.
Two or more non-adjacent yarns were completely broken, the test was terminated, and the abrasion resistance of the fabric was determined according to the total number of times the sample was worn. In the daily testing process, FZ / T 81006-2007 "denim clothing" on the denim wear resistance made a clear request, the nominal pressure of 9kPa, denim fabric unit area quality in 339g / m2 above, wear resistance requirements ≥ 25000 times , The unit area of the quality of 339g / m2 below, wear resistance requirements ≥ 15000 times.
Hi..
回复删除I appreciate your Informative post and thanks for sharing.
Ink Abrasion Resistance Tester