跳至主要内容

Abrasion Resistance Test Method And Requirements

abrasion resistance is one of the important performance of denim clothing, but also the production enterprises and consumers are mainly concerned about the indicators. Poor wear resistance of clothing, easy to wear after wearing, affecting the use of the product cycle.


 At present, FZ / T81006-2007 "denim clothing" standard for the detection of wear resistance is mainly used GB / T 21196.2-2007 "Textile Martindale fabric abrasion resistance of the second part: the determination of sample damage" The principle is to cut a representative sample on the denim clothing, placed on the Martindale wear tester, in the specified load and speed, the trajectory for the Lissajous (Lissajous) graphics plane motion and abrasive Friction, the specimen holder can be free to rotate about the center axis perpendicular to the horizontal plane.


 Two or more non-adjacent yarns were completely broken, the test was terminated, and the abrasion resistance of the fabric was determined according to the total number of times the sample was worn. In the daily testing process, FZ / T 81006-2007 "denim clothing" on the denim wear resistance made a clear request, the nominal pressure of 9kPa, denim fabric unit area quality in 339g / m2 above, wear resistance requirements ≥ 25000 times , The unit area of ​​the quality of 339g / m2 below, wear resistance requirements ≥ 15000 times.
标签：

评论

发表评论

此博客中的热门博文

Tinuvin 1130: An Excellent UV Absorber

 In the field of the chemical industry, UV absorbers play a crucial role, particularly in protecting materials from UV damage. Today, we will delve into a highly regarded UV absorber—Tinuvin 1130. Tinuvin 1130 : chemical name: 3-(3-(2H-benzotriazole-2-yl)-4-hydroxy-5-tert-butyl phenyl)propionic acid polyethylene glycol 300 ester; CAS login number: 104810-48-2. This product is an exceptional UV absorber that offers numerous benefits due to its unique properties. One of the standout features of Tinuvin 1130 is its excellent weather resistance. It has a strong ability to absorb ultraviolet rays, particularly those with wavelengths ranging from 290-400nm. This effectively prevents coatings, plastics, rubber, and other materials from being damaged by UV rays, thereby maintaining the performance and appearance stability of these materials and extending their service life. In addition, Tinuvin 1130 exhibits good compatibility. It is easy to emulsify in water-based systems and can be...
发表评论
阅读全文

Air-cooled Xenon Lamp Aging Tester

  The air-cooled xenon lamp aging tester is a device that uses an air-cooled system to dissipate heat and a xenon lamp to simulate ultraviolet light, visible light and infrared light in natural sunlight to perform accelerated aging tests on materials. It is commonly used in industries such as automobiles, coatings, plastics, rubber, and textiles. It can evaluate the aging resistance of materials under the combined effects of long-term light, temperature, humidity and other environmental factors in a relatively short period of time, helping companies improve product quality, extend service life, and optimize product anti-aging formulas and processes. Structural composition:  The main body is a test chamber, equipped with a xenon lamp and a matching optical filter system to simulate sunlight of different wavelengths, as well as temperature, humidity, lighting time and other control and adjustment devices, as well as an observation window and a sample rack. Working principle: The...
发表评论
阅读全文

The Structure of Hexapod Tumble Tester

The Hexapod Tumbler Tester is a popular apparatus used in the evaluation of the appearance retention of carpets. Drum – constructed of Nylon or other like material and capped by a lid that is secured by a latching device. The drum and lid have a locating groove to hold the specimen backing sheet flat to the inner wall of the drum. A photograph of a typical drum is show in Photograph 1 and Photograph 2. The drum dimensions are:   Internal Diameter: 12 ± 0.18 in. (302 ± 5mm) Wall Thickness :0.3 in. approx. (8 mm approx.) Internal Depth: 8.2 ± 0.2 in. (207 ± 5 mm)  Driving System - cradles the drum on rollers and keeps the axis of the drum level, and rotates the drum at 35 ± 2 rpm (3.6 ± 0.2 rad/s). The driving direction reverses after approximately 500 revolutions.  After the 500 rotations the unit will stop and stand stationary for approximately 5 to 15 seconds, then begin rotating in the opposite direction. After 2000 rotations the unit will stop and w...
发表评论
阅读全文