跳至主要内容

Color Fastness Selection Techniques

According to China's product standards and the actual use of fabric, clothing (ornaments) and home textiles products, color fastness test, generally according to the following methods:

1、 fabric classTest the color fastness to wash the fabric, generally according to its end use to choose the washing method. In the case of unknown use, according to the following methods:① wire, viscose fiber, wool, nylon fabric, with reference to GB / T392l a 2008A (1), the test temperature is (40 ± 2) ℃.② cotton, linen, polyester, acrylic fabric, with reference to GB / T3921-2008C (3), the test temperature is (60 ± 2) ℃.③ new fiber, such as Lyocel fiber, Modal fiber, milk protein fiber and soybean protein fiber, should be based on fiber performance and dyeing process may be, generally use GB / T3921-2008A (1) standard, the test temperature is (40 ± 2) ℃.


2、 clothing (ornaments) class(1) knitted garments knitted casual wear, body underwear, thermal underwear, knitted skirts, infant knitted apparel, socks and bra and other products, are referred to GB / T3921-2008A (1), the temperature is (40 ± 2) ℃. However, in cotton knitwear, cotton knitted underwear, except T-shirt (except nylon), knitted sportswear and linen knitwear should refer to GB / T3921-2008C (3), the test temperature is (60 ± 2) ℃.(2) wool knitwear sweater according to the washing requirements of the use of GB / T12490-2007 A1S or B2S method, hand wash selection A1S procedures, machine wash selection B2S procedures; low wool and wool knitwear, cashmere sweater selection GB / A1S test conditions in T12490-2007.(3) Woven clothing denim clothing, single clip clothing, skirt, baby clothes and jackets, use GB / T3921-2008C (3) method, the test temperature is (60 ± 2) ℃; but the composition of silk, (40 ± 2) for GB / T3921-2008A (1) method, for the use of GB / T3921-2008A (1) method for the use of GB / T3921-2008A (1) method for single knitwear, skirts, baby clothes and jackets (including jackets for nylon fabrics) ℃. Wind and rain clothing, silk clothing selection GB / T3921-2008A (1).


3、 home textiles category(1) towels and bedding according to the relevant industry standards, towels, bedding washing fastness test according to GB / T3921-2008C (3), the test temperature is (60 ± 2) ℃.(2) decorative fabric washing fastness test method, according to GB / T12490-2007 A1S conditions, if the product is used on the instructions for the gentle washing or hand washing, the test without steel beads. Suggest(1) test the color fastness of textiles, according to the standards and trade needs to choose the washing method and stickers, domestic trade can choose single fiber stickers, foreign trade commonly used multi-fiber stickers.(2) test samples to be representative, especially the printing products to ensure that each color is taken, the rating should pay attention to the corresponding color of the pattern.(3) The combination sample is a short side suture, when the sample is yarn or scatter, the sample is half the total mass of the fabric, along the four sides suture.(4) test solution should be preheated to the test temperature, otherwise it will affect the test results.(5) rating, the eyes should be perpendicular to the sample, the light source and the sample into 45. , The distance is maintained at 30 ~ 40cm; for shiny samples, the light source is vertical, eyes and samples into 45.

评论

  1. Wonderful points most people wrote in this article... Great items… I think you have made some genuinely interesting elements. Keep the good do the job.

    Buy Designer Lehenga For Kids

    回复删除

发表评论

此博客中的热门博文

Multi-Functional Scratch tester For automotive interior materials

          Multi-Functional Scratch tester is applicable to all types of wiping performance test of automotive interior materials; test equipment integrated three domestic standards (fingers scraping method, a hundred grid method, and plastic scraping finger scraping method).         Scratch tester is an electronic instrument capable of measuring critical load, adhesion, scratch resistance and bond strength for a wide range of surfaces. Scratch tester measures the scratch resistance of a sliding and moving surface in the relative motion to a stylus. The stylus is forced/pressed against the moving surface with precise controlled force which is normal to the surface and tangential force at the contact has to be measured.         Scratch tester can be utilized for all type of industrial coating from the plasma layers used in semiconductor and optical technology used in decorative coatings used for automotive and consum...

Reveal the standards for textile breathability testing and let you understand it in seconds!

 Reveal the standards for textile breathability testing and let you understand it in seconds! Breathability testing is a measure of how much gas can pass through a textile. However, there is no single "optimal" air permeability value, as it depends on the specific circumstances in which the textile is used. For example, if it is used to make sportswear, it is hoped that it has good breathability; if it is used to make insulating clothes or warm clothes, it is hoped that it can block the cold well. Therefore, when testing the air permeability of textiles, the purpose of using the textile must be clearly understood in order to obtain reasonable values. In order to accurately and quickly test the true breathability performance of a sample, specially designed and developed instruments must be used. Testing methods generally include: fabric thickness (Thickness), fabric density (Density), fabric water absorption rate (Water Absorption Rate), evaporation and mass transfer (Moistur...

Test Methods of Universal Pilling Assessment Viewer (PAV)

Universal Pilling Assessment Viewer enables fabric to be assessed while still mounted on a Martindale head. The Pilling Assessment Viewer (PAV) for the textile market has been developed with the help of a major textile company in accordance to BN EN ISO 12945 standards incorporating all 3 parts and adopting the following test methods: Part 1: ICI Pilling box method (BS 5811) Part 2: Modified Martindale method (SN 198 525) Part 3: Atlas random tumble method (ASTM D 3512-96) It uses D65 Artificial Daylight (with CWF optionally available), as specified by many retailers. Other test methods can also be viewed, including those specified by major retailers. Other results of test methods that can be viewed include: BS 5811:1986 Determination of resistance to pilling and change of appearance of fabrics. ICI modified pill box for snagging Fleece appearance and surface change after washing Other test methods as specified by several major retail outlet. To optimize c...