The leather folding test machine is used to test the bending resistance of leather under continuous bending. The
instrument is internationally used for a variety of light leather and
its surface modification for bending performance evaluation of the
instrument. At
the same time can also be measured due to walking in the crease in the
formation of the tendency of cracking, bending tester bending mechanism
and the upper deflection tester is different, both complementary
functions. It is also used to pre-treat samples prior to the determination of
water vapor permeability - especially for the determination of upper
materials for protective footwear.How to maintain the leather folding test machine ?There Can be divided into nine steps as follows:
1. Before the start should be in accordance with the provisions of the lubrication and lubrication methods to lubricate;2. by the understanding of the structure of the testing machine professional and technical personnel disassembly;3. After each test test bench down, the best piston does not fall to
the bottom of the tank, stay a little distance to facilitate the next
use;4. All the gauges on the dynamometer should not be opened to prevent
dust from entering the interior and affect the sensitivity of the
measuring mechanism;5. When the test machine is permanently disabled, it should be coated
with anti-rust oil on the working surface and stored in a dry place;6. Equipment to wipe the ministries, during the rainy season should
pay attention to wipe, when not covered with a dust cover to prevent
dust intrusion, to keep the test machine daily cleaning;7. Operators are not allowed to disassemble electrical appliances, or easy to damage the original electronic;8. The test machine housing should be reliably grounded;9.
Test should avoid intermittent operation, otherwise it will affect the
equipment life; as much as possible once in place to reduce the number
of jogging.
评论
发表评论