跳至主要内容

Test Principle Of Hydrostatic Head Test

Hydrostatic head test for the Textiles test in the textile industry is very extensive, but also a certain degree of resistance to hydrostatic pressure requirements is need for some special fabrics  , so the static water pressure test is necessary. What is the main test principle of this type of experiment?  let us explain briefly.The Hydrostatic head Tester is the best Hydrostatic head test machine.

The so-called waterproof and moisture (water repellent), is to make the water at low water pressure does not wet the fabric, but the body sweat in the form of water vapor through the fabric conduction to the outside world, water vapor is not between the body surface and fabric aggregation, Do not feel "boring" phenomenon. Fabric after water repellent finishing, finishing agent to change the fiber surface properties, so that the fiber surface of the hydrophilic to hydrophobic, the fabric is not easy to be wet and still breathable, and soft to the touch.

Textile washing, fabric refining desizing, the absorption of the dye and water and oil repellent properties are related to the wettability of the liquid on the solid. Washing, scouring, desizing and dye absorption processes require fibrous materials with high wettability and permeability, while water repellency requires that the fibers are not wet or wet. The wetting of the fabric is the rapid spread of moisture on the surface of the fabric, and the purpose of water repellent is just the opposite, trying to make the water droplets on the fabric surface is not spread, do not wet the fabric, still keep the water droplets.

Wetting and water repellent depends on the surface tension of solids and liquids. If the solid surface tension is greater than the liquid surface tension, the liquid wetting the solid surface, the solid surface has a water repellent effect. The ability of the fabric to resist wetting and infiltration of the liquid depends on the chemical structure of the fabric, surface geometry, roughness and hairiness. The finishing agent used for the repellent effect has a large contact angle or a low surface tension. Fabrics treated by these finishing agents, the surface tension is reduced, so as to achieve water repellent effect.

评论

此博客中的热门博文

Multi-Functional Scratch tester For automotive interior materials

          Multi-Functional Scratch tester is applicable to all types of wiping performance test of automotive interior materials; test equipment integrated three domestic standards (fingers scraping method, a hundred grid method, and plastic scraping finger scraping method).         Scratch tester is an electronic instrument capable of measuring critical load, adhesion, scratch resistance and bond strength for a wide range of surfaces. Scratch tester measures the scratch resistance of a sliding and moving surface in the relative motion to a stylus. The stylus is forced/pressed against the moving surface with precise controlled force which is normal to the surface and tangential force at the contact has to be measured.         Scratch tester can be utilized for all type of industrial coating from the plasma layers used in semiconductor and optical technology used in decorative coatings used for automotive and consum...

Reveal the standards for textile breathability testing and let you understand it in seconds!

 Reveal the standards for textile breathability testing and let you understand it in seconds! Breathability testing is a measure of how much gas can pass through a textile. However, there is no single "optimal" air permeability value, as it depends on the specific circumstances in which the textile is used. For example, if it is used to make sportswear, it is hoped that it has good breathability; if it is used to make insulating clothes or warm clothes, it is hoped that it can block the cold well. Therefore, when testing the air permeability of textiles, the purpose of using the textile must be clearly understood in order to obtain reasonable values. In order to accurately and quickly test the true breathability performance of a sample, specially designed and developed instruments must be used. Testing methods generally include: fabric thickness (Thickness), fabric density (Density), fabric water absorption rate (Water Absorption Rate), evaporation and mass transfer (Moistur...

Test Methods of Universal Pilling Assessment Viewer (PAV)

Universal Pilling Assessment Viewer enables fabric to be assessed while still mounted on a Martindale head. The Pilling Assessment Viewer (PAV) for the textile market has been developed with the help of a major textile company in accordance to BN EN ISO 12945 standards incorporating all 3 parts and adopting the following test methods: Part 1: ICI Pilling box method (BS 5811) Part 2: Modified Martindale method (SN 198 525) Part 3: Atlas random tumble method (ASTM D 3512-96) It uses D65 Artificial Daylight (with CWF optionally available), as specified by many retailers. Other test methods can also be viewed, including those specified by major retailers. Other results of test methods that can be viewed include: BS 5811:1986 Determination of resistance to pilling and change of appearance of fabrics. ICI modified pill box for snagging Fleece appearance and surface change after washing Other test methods as specified by several major retail outlet. To optimize c...