跳至主要内容

The Physical Structure and Specification of Textiles Fabric Surface Flammability Tester

The Surface Flammability Tester is used to detect the burning behaviour of wool or fur fabric. The flame spreads quickly on the surface of the fabric, but the base cloth of the fabric does not burn.The mobile butane burner moves laterally on the surface of the fabric to see if there is a surface flame and record the damage to the base cloth.

Physical Structure:
Specification 

fixture length
400mm
burner move speed
150±5mm/s
burner stroke
≥300mm
fabric plush altitude
70mm
Space between two fixtures
100mm
sample dimension
length 200mm,width≥130mm
sample amount for test
2 pcs
space between burner and sample surface
5mm
space beteen burner center to lower fixture
15mm
burning gases
butane gas
Size(WxDxH)
60x41x32cm
weight(Kg)
≈20Kg
power
1∮ AC  220V  5A

Reference standards are as follows:
1. GB/T 8745-2001《textile Combustion performance fabric surface burning time measurement》
2. ISO 10047:1993《textile fabric surface burning time measurement》

-------------------------------------------------------------------------------

For more information about ourSurface Flammability Tester, please contact
· +86-21-6780 0179
· info@qinsun-lab.com
· or leave your comments below


评论

发表评论

此博客中的热门博文

Multi-Functional Scratch tester For automotive interior materials

          Multi-Functional Scratch tester is applicable to all types of wiping performance test of automotive interior materials; test equipment integrated three domestic standards (fingers scraping method, a hundred grid method, and plastic scraping finger scraping method).         Scratch tester is an electronic instrument capable of measuring critical load, adhesion, scratch resistance and bond strength for a wide range of surfaces. Scratch tester measures the scratch resistance of a sliding and moving surface in the relative motion to a stylus. The stylus is forced/pressed against the moving surface with precise controlled force which is normal to the surface and tangential force at the contact has to be measured.         Scratch tester can be utilized for all type of industrial coating from the plasma layers used in semiconductor and optical technology used in decorative coatings used for automotive and consum...
发表评论
阅读全文

Reveal the standards for textile breathability testing and let you understand it in seconds!

 Reveal the standards for textile breathability testing and let you understand it in seconds! Breathability testing is a measure of how much gas can pass through a textile. However, there is no single "optimal" air permeability value, as it depends on the specific circumstances in which the textile is used. For example, if it is used to make sportswear, it is hoped that it has good breathability; if it is used to make insulating clothes or warm clothes, it is hoped that it can block the cold well. Therefore, when testing the air permeability of textiles, the purpose of using the textile must be clearly understood in order to obtain reasonable values. In order to accurately and quickly test the true breathability performance of a sample, specially designed and developed instruments must be used. Testing methods generally include: fabric thickness (Thickness), fabric density (Density), fabric water absorption rate (Water Absorption Rate), evaporation and mass transfer (Moistur...
发表评论
阅读全文

Automotive materials and components testing

Automotive Original Equipment Manufacturers (OEMs) demand the highest quality components throughout the supply chain. Every automotive material and component must undergo rigorous testing and meet the highest industry and legal requirements. Qinsun-Lab assists manufacturers and suppliers with independent assured testing services against a wide range of OEM testing specifications, national (BS, ASTM, DIN, JASO) and international (ISO, EN, SAE) standards. SATRA’s testing services are accredited to ISO 17025. Flammability Motor vehicles contain components that burn if subjected to a large enough ignition source. These include seat upholstery, headlining, trim panels and floor coverings. Qinsun-lab can conduct a range of flammability tests including FMVSS 302 and ISO 3795. Abrasion and Scratch Tester Automotive materials experience mild abrasive actions from users entering the vehicle and being seated while driving or travelling. Qinsun-lab has a range of tests including Mar...
3 条评论
阅读全文