Features of Ink Abrasion Resistance Tester

The Digital Ink Rub Tester is designed to measure scuffing or rubbing resistance. Several tests can be performed including dry rub(the amount of transfer ink from one dry surface to another), wet rub(the amount of transfer of ink from wetted
surface to another), wet bleed or transfer (ink transfer to a water-saturated blotter), wet smear(similar to wet bleed with the addition or rub cycles), functional rub/wet rub(smear or transfer tests using a liquid other than water), and hot abrasion.

An optional heated weight provides a uniform test for evaluating “hot abrasion” resistance of printed cartons, labels etc.Ink Abrasion tester is used in the dry grinding test, wet test, bleaching change test, paper fuzzy test, and special friction test. Effective analysis of the print is poor abrasion resistance, poor adhesion, ink off, ink marking, PS version of the anti-Indian forces and other products, coatings with poor low hardness performance.

FEATURES

Three speeds: A standard speed (42 cycles per minute) and two higher speeds (85 and 100 cycles per minute) allow you to decrease the testing time  for samples requiring a higher number of rubs

Large character LCD display

Displays count up, count down, test status and configurations

Preset counts remain in memory

Automatic shut-off

Selectable “test complete” alarm

One-year warranty

-------------------------------------------------------------------

For more information about our testing instrument, please contact

·website:http://www.qinsun-lab.com/

· +86-21-6780 0179

· info@qinsun-lab.com

· or leave your comments below