跳至主要内容

How To Test Washing Color Fastness?

Wash color fastness tester can be used for washing, dry cleaning test. Dual cylinder separation, equipped with separate operation control panel, can carry out two different temperature experiments at the same time. Electronic light touch switch, LCD menu display, no mechanical contact, safe and reliable. The test frame drive is stable and reliable in exchange for washing cup. Equipped with 500ml and 1200ml water washing cups, each cylinder contains 24 cup slots (12 different sizes) to meet different test requirements. The heating pipe has no noise, long life and accurate temperature control.


Wash fastness test steps:
First, sample, size of 40 mm x 100 mm, affixed lining fabric is the same as the sample size, can two pieces is the single fiber affixed lining fabric or a fiber lining fabric, and sample along the short edge stitching, form a composite sample.

Second, Dual cylinder Wash color fastness test instrument: diameter of 75 mm and 125 mm high airtight container, sealed container along the radius of 45 mm. And rotational speed of 40 r/min, and staying within the prescribed under the temperature and time of mechanical stirring.

Third. Test conditions: the temperature, time and feeding of the five test methods are:
Methods a; 40 ℃, 30 min;
Method 2:50 ℃, 30 min;
Method 3:60℃, 30 min;
Method 4:95 ℃, 30 min, Add 10 stainless steel bead;
Method 5:95 ℃, 240 min, add 10 stainless steel beads.

Forth, washing test solution, test solution by 5 g/L soap flakes and 2 g/L anhydrous sodium carbonate, standard synthetic detergent or 4 g/L and 1 g/L of anhydrous sodium carbonate, synthetic detergent soap flakes and standards should not contain fluorescent whitening agent.
-------------------------------------------------------------------
For more information about our testing instrument, please contact
·website:http://www.qinsun-lab.com/
· +86-21-6780 0179
· info@qinsun-lab.com
· or leave your comments below


评论

此博客中的热门博文

Multi-Functional Scratch tester For automotive interior materials

          Multi-Functional Scratch tester is applicable to all types of wiping performance test of automotive interior materials; test equipment integrated three domestic standards (fingers scraping method, a hundred grid method, and plastic scraping finger scraping method).         Scratch tester is an electronic instrument capable of measuring critical load, adhesion, scratch resistance and bond strength for a wide range of surfaces. Scratch tester measures the scratch resistance of a sliding and moving surface in the relative motion to a stylus. The stylus is forced/pressed against the moving surface with precise controlled force which is normal to the surface and tangential force at the contact has to be measured.         Scratch tester can be utilized for all type of industrial coating from the plasma layers used in semiconductor and optical technology used in decorative coatings used for automotive and consum...

Reveal the standards for textile breathability testing and let you understand it in seconds!

 Reveal the standards for textile breathability testing and let you understand it in seconds! Breathability testing is a measure of how much gas can pass through a textile. However, there is no single "optimal" air permeability value, as it depends on the specific circumstances in which the textile is used. For example, if it is used to make sportswear, it is hoped that it has good breathability; if it is used to make insulating clothes or warm clothes, it is hoped that it can block the cold well. Therefore, when testing the air permeability of textiles, the purpose of using the textile must be clearly understood in order to obtain reasonable values. In order to accurately and quickly test the true breathability performance of a sample, specially designed and developed instruments must be used. Testing methods generally include: fabric thickness (Thickness), fabric density (Density), fabric water absorption rate (Water Absorption Rate), evaporation and mass transfer (Moistur...

Test Methods of Universal Pilling Assessment Viewer (PAV)

Universal Pilling Assessment Viewer enables fabric to be assessed while still mounted on a Martindale head. The Pilling Assessment Viewer (PAV) for the textile market has been developed with the help of a major textile company in accordance to BN EN ISO 12945 standards incorporating all 3 parts and adopting the following test methods: Part 1: ICI Pilling box method (BS 5811) Part 2: Modified Martindale method (SN 198 525) Part 3: Atlas random tumble method (ASTM D 3512-96) It uses D65 Artificial Daylight (with CWF optionally available), as specified by many retailers. Other test methods can also be viewed, including those specified by major retailers. Other results of test methods that can be viewed include: BS 5811:1986 Determination of resistance to pilling and change of appearance of fabrics. ICI modified pill box for snagging Fleece appearance and surface change after washing Other test methods as specified by several major retail outlet. To optimize c...