跳至主要内容

Spray Rating Tester For Measuring The Water Resistant Efficiency

       Water repellency is an important property of textile fabrics to measure the efficiency of water resistant/repellant finishing applied on textiles.Spray Rating Tester is the appropriate equipment to test the property spraying a specified volume of distilled water is sprayed on a Test specimen, which has been mounted on a ring and placed at an angle of 45°, so that the center of the specimen is 150mm below the spray nozzle. The Spray rating is determined by comparing the appearance of the specimen with AATCC Spray Test Rating Chart.
      Spray Rating Tester is not intended to predict waterproofness, since it does not measure the penetration of water through fabric. It is designed to determine the surface wetting resistance of any fabrics, which may or may not have been given a water-repellent finish.The instrument comprises a stainless steel framework, incorporating a funnel. The spray nozzle is mounted on the neck of the funnel. The precision spray nozzle contains 19 holes - one central hole surrounded by two concentric rings of 6 and 12 holes respectively.
A specified volume of distilled water is sprayed on to the test specimen, and its spray rating is determined by comparing the appearance of the specimen with descriptive standards or the AATCC Spray Test Rating Chart.The specimen holder is a particular feature of our Spray Rating Tester, facilitating rapid and secure mounting of specimens, in the correct position, on the instrument.

 A specified volume of distilled water is sprayed on to the test specimen, and its spray rating is determined by comparing the appearance of the specimen with descriptive standards or the AATCC Spray Test Rating Chart.The specimen holder is a particular feature of our Spray Rating Tester, facilitating rapid and secure mounting of specimens, in the correct position, on the instrument.
-------------------------------------------------------------------

 For more information about our testing instrument, please contact

 · +86-21-6780 0179

 · info@qinsun-lab.com

 · or leave your comments below




评论

  1. Unknown2018年3月14日 23:43

    Spray tester is important for us in the rain, it is so uncomfortable that the wet clothes cling to our skin.

    回复删除
  2. wade2018年7月26日 18:31

    Spray Rating Tester, to determine the surface wetting resistance of fabrics, welcome to contact us if you want to know more.

    回复删除

发表评论

此博客中的热门博文

Multi-Functional Scratch tester For automotive interior materials

          Multi-Functional Scratch tester is applicable to all types of wiping performance test of automotive interior materials; test equipment integrated three domestic standards (fingers scraping method, a hundred grid method, and plastic scraping finger scraping method).         Scratch tester is an electronic instrument capable of measuring critical load, adhesion, scratch resistance and bond strength for a wide range of surfaces. Scratch tester measures the scratch resistance of a sliding and moving surface in the relative motion to a stylus. The stylus is forced/pressed against the moving surface with precise controlled force which is normal to the surface and tangential force at the contact has to be measured.         Scratch tester can be utilized for all type of industrial coating from the plasma layers used in semiconductor and optical technology used in decorative coatings used for automotive and consum...
发表评论
阅读全文

Reveal the standards for textile breathability testing and let you understand it in seconds!

 Reveal the standards for textile breathability testing and let you understand it in seconds! Breathability testing is a measure of how much gas can pass through a textile. However, there is no single "optimal" air permeability value, as it depends on the specific circumstances in which the textile is used. For example, if it is used to make sportswear, it is hoped that it has good breathability; if it is used to make insulating clothes or warm clothes, it is hoped that it can block the cold well. Therefore, when testing the air permeability of textiles, the purpose of using the textile must be clearly understood in order to obtain reasonable values. In order to accurately and quickly test the true breathability performance of a sample, specially designed and developed instruments must be used. Testing methods generally include: fabric thickness (Thickness), fabric density (Density), fabric water absorption rate (Water Absorption Rate), evaporation and mass transfer (Moistur...
发表评论
阅读全文

Automotive materials and components testing

Automotive Original Equipment Manufacturers (OEMs) demand the highest quality components throughout the supply chain. Every automotive material and component must undergo rigorous testing and meet the highest industry and legal requirements. Qinsun-Lab assists manufacturers and suppliers with independent assured testing services against a wide range of OEM testing specifications, national (BS, ASTM, DIN, JASO) and international (ISO, EN, SAE) standards. SATRA’s testing services are accredited to ISO 17025. Flammability Motor vehicles contain components that burn if subjected to a large enough ignition source. These include seat upholstery, headlining, trim panels and floor coverings. Qinsun-lab can conduct a range of flammability tests including FMVSS 302 and ISO 3795. Abrasion and Scratch Tester Automotive materials experience mild abrasive actions from users entering the vehicle and being seated while driving or travelling. Qinsun-lab has a range of tests including Mar...
3 条评论
阅读全文