Two standards are used to evaluate the cut protection levels of gloves. The American National Standards Institute/International Safety Equipment Association (ANSI/ISEA) 105 "American National Standard for Hand Protection" is the U.S. standard for glove testing.
The European standard – EN388 "Protective Gloves against Mechanical Risks" – is the European Union (EU) standard for glove testing and it also is referenced globally. Both ANSI/ISEA 105 and EN388 are used to test gloves for mechanical risks such as abrasion, cut, tear and puncture, with cut ratings generating the most interest amongst glove users.
EN 388-2016 uses different level groupings and references two different cut test methods in the revised standard. The use of the second test is dependent upon the results of the first. The first test uses the coupe test and a rotating blade under a fixed weight is moved back and forth on the surface of the glove until cut-through. The results are then compared to a reference fabric.
If the glove material dulls the coupe tester blade, then the second cut test – ISO 13997 – is performed. Like ASTM F2292-15, the ISO 13997 test also uses a TDM machine and pulls a blade in 20 mm paths across the glove's surface under varied gram loads. But the cut through is measured in newtons – a unit of force. One newton is equivalent to 101.97 grams.
For more information about our Gloves Cut Testing instrument, please contact
·website:http://www.qinsun-lab.com/
· Phone :+86-21-6780 0179
· E-mail :info@qinsun-lab.com
The European standard – EN388 "Protective Gloves against Mechanical Risks" – is the European Union (EU) standard for glove testing and it also is referenced globally. Both ANSI/ISEA 105 and EN388 are used to test gloves for mechanical risks such as abrasion, cut, tear and puncture, with cut ratings generating the most interest amongst glove users.
EN 388-2016 uses different level groupings and references two different cut test methods in the revised standard. The use of the second test is dependent upon the results of the first. The first test uses the coupe test and a rotating blade under a fixed weight is moved back and forth on the surface of the glove until cut-through. The results are then compared to a reference fabric.
If the glove material dulls the coupe tester blade, then the second cut test – ISO 13997 – is performed. Like ASTM F2292-15, the ISO 13997 test also uses a TDM machine and pulls a blade in 20 mm paths across the glove's surface under varied gram loads. But the cut through is measured in newtons – a unit of force. One newton is equivalent to 101.97 grams.
For more information about our Gloves Cut Testing instrument, please contact
·website:http://www.qinsun-lab.com/
· Phone :+86-21-6780 0179
· E-mail :info@qinsun-lab.com
评论
发表评论