UL94 horizontal and vertical combustion tester is designed to simulate the early firing situation of electronic and electrical products in order to evaluate the firing hazard through this simulation technology.When all of the flame test data has been gathered, it’s used to group the tested material into one of three specific material classes: 94V-0, 94V-1, or 94V-2. Below you’ll find the requirements for each classification.
UL94V-0:Following either or both of the controlled flame applications, samples may not sustain burning combustion for longer than 10 seconds.Total flaming combustion time for 5 samples (counting both controlled-flame applications) may not exceed 50 seconds.None of the samples may be burned up to the mounting clamp by either flaming or glowing combustion.None of the samples may drip flaming particles that result in the ignition of the surgical cotton below them.Following the removal of the second controlled flame, samples may not exhibit glowing combustion for more than 30 seconds.
UL94V-1:Following either controlled flame application, none of the samples may sustain flaming combustion for longer than 30 seconds.The total flaming combustion time for 5 samples (each exposed twice to a controlled flame) may not exceed 250 seconds.Flaming or glowing combustion may not result in any of the samples being burned up to their holding clamps.While samples may drip flaming particles that burn briefly, these particles may not cause the actual ignition of the underlying dry surgical cotton.Samples may not exhibit glowing combustion for more than 60 seconds after the removal of the second controlled flame.
UL94V-2:Following either the first or second controlled-flame application, none of the samples may support flaming combustion for longer than 30 seconds.The total flaming combustion time for 5 samples (each being twice-exposed to a controlled flame) may not exceed 250 seconds.Flaming or glowing combustion may not cause any of the samples to burn up to their holding clamps.Samples are allowed to drip briefly-burning flaming particles, which may cause the dry surgical cotton they land on to ignite.Upon the removal of the second controlled flame, none of the samples may exhibit glowing combustion for a period of time greater than 60 seconds.
---------------------------------------------------------------------------------
For more information about our UL 94 Vertical Combustion Test chamber, please contact
· +86-21-6780 0179
· info@qinsun-lab.com
· or leave your comments below
UL94V-0:Following either or both of the controlled flame applications, samples may not sustain burning combustion for longer than 10 seconds.Total flaming combustion time for 5 samples (counting both controlled-flame applications) may not exceed 50 seconds.None of the samples may be burned up to the mounting clamp by either flaming or glowing combustion.None of the samples may drip flaming particles that result in the ignition of the surgical cotton below them.Following the removal of the second controlled flame, samples may not exhibit glowing combustion for more than 30 seconds.
UL94V-1:Following either controlled flame application, none of the samples may sustain flaming combustion for longer than 30 seconds.The total flaming combustion time for 5 samples (each exposed twice to a controlled flame) may not exceed 250 seconds.Flaming or glowing combustion may not result in any of the samples being burned up to their holding clamps.While samples may drip flaming particles that burn briefly, these particles may not cause the actual ignition of the underlying dry surgical cotton.Samples may not exhibit glowing combustion for more than 60 seconds after the removal of the second controlled flame.
UL94V-2:Following either the first or second controlled-flame application, none of the samples may support flaming combustion for longer than 30 seconds.The total flaming combustion time for 5 samples (each being twice-exposed to a controlled flame) may not exceed 250 seconds.Flaming or glowing combustion may not cause any of the samples to burn up to their holding clamps.Samples are allowed to drip briefly-burning flaming particles, which may cause the dry surgical cotton they land on to ignite.Upon the removal of the second controlled flame, none of the samples may exhibit glowing combustion for a period of time greater than 60 seconds.
---------------------------------------------------------------------------------
For more information about our UL 94 Vertical Combustion Test chamber, please contact
· +86-21-6780 0179
· info@qinsun-lab.com
· or leave your comments below
评论
发表评论