Common Analysis Of Taber Abrasion Tester

Textile Testing Instruments Manufacturer_QINSUN: Taber abrasion testing machine mainly through the rotation of the grinding method, the use of different types of friction wheel on the sample rotation to detect leather and plastic materials such as wear resistance.

Taber abrasion tester mainly used for the wear tests of suitcases, carpets, cardboard, clothing, glass, plastic coating, tiles, metal coating, paint, varnish, decorative flakes, high pressure sheet, plastic, textiles, flexible floor mats, traffic paint, anodized, electronic components, decorative panels, wax, labels, leather, dental materials, automotive interior ornaments, resins, furniture and so on.

Common malfunctions of Taber abrasion tester :
1. If the power is turned on, it indicates that there is no power supply or power indicator is damaged. If the power indicator is damaged, replace the indicator light. If the power supply output.

2. terminal does not have a power output, please check the power cord or power outlet.

3. If the power is on, the power indicator has an indication. Press the start button. The machine does not work. Please check whether the relay has dropped or disconnected, such as dropped or disconnected. , Indicating that the relay is damaged, it should be replaced.

4. When the number of times the counter has been set to the counter, the motor does not stop working, indicating
(1) the counter is damaged;
(2) After the counter is set, it is not cleared.

5. If the power indicator is on and the counter is not displayed, the counter is damaged and the counter is replaced.
For more information about our testing instrument, please contact

·website:http://www.qinsun-lab.com/

· Phone :+86-21-6780 0179

· E-mail :info@qinsun-lab.com

此博客中的热门博文

Multi-Functional Scratch tester For automotive interior materials

Multi-Functional Scratch tester is applicable to all types of wiping performance test of automotive interior materials; test equipment integrated three domestic standards (fingers scraping method, a hundred grid method, and plastic scraping finger scraping method). Scratch tester is an electronic instrument capable of measuring critical load, adhesion, scratch resistance and bond strength for a wide range of surfaces. Scratch tester measures the scratch resistance of a sliding and moving surface in the relative motion to a stylus. The stylus is forced/pressed against the moving surface with precise controlled force which is normal to the surface and tangential force at the contact has to be measured. Scratch tester can be utilized for all type of industrial coating from the plasma layers used in semiconductor and optical technology used in decorative coatings used for automotive and consum...

阅读全文

Reveal the standards for textile breathability testing and let you understand it in seconds!

Reveal the standards for textile breathability testing and let you understand it in seconds! Breathability testing is a measure of how much gas can pass through a textile. However, there is no single "optimal" air permeability value, as it depends on the specific circumstances in which the textile is used. For example, if it is used to make sportswear, it is hoped that it has good breathability; if it is used to make insulating clothes or warm clothes, it is hoped that it can block the cold well. Therefore, when testing the air permeability of textiles, the purpose of using the textile must be clearly understood in order to obtain reasonable values. In order to accurately and quickly test the true breathability performance of a sample, specially designed and developed instruments must be used. Testing methods generally include: fabric thickness (Thickness), fabric density (Density), fabric water absorption rate (Water Absorption Rate), evaporation and mass transfer (Moistur...

阅读全文

Test Methods of Universal Pilling Assessment Viewer (PAV)

Universal Pilling Assessment Viewer enables fabric to be assessed while still mounted on a Martindale head. The Pilling Assessment Viewer (PAV) for the textile market has been developed with the help of a major textile company in accordance to BN EN ISO 12945 standards incorporating all 3 parts and adopting the following test methods: Part 1: ICI Pilling box method (BS 5811) Part 2: Modified Martindale method (SN 198 525) Part 3: Atlas random tumble method (ASTM D 3512-96) It uses D65 Artificial Daylight (with CWF optionally available), as specified by many retailers. Other test methods can also be viewed, including those specified by major retailers. Other results of test methods that can be viewed include: BS 5811:1986 Determination of resistance to pilling and change of appearance of fabrics. ICI modified pill box for snagging Fleece appearance and surface change after washing Other test methods as specified by several major retail outlet. To optimize c...

阅读全文

Testile Testing Equipment

搜索此博客