跳至主要内容

Test comparison between Martindale and taber abrasion tester

Test comparison between Martindale and taber abrasion tester:

1、Martindale flat abrasion method


Test instrument: Martindale abrasion tester


Martindale flat abrasion method and taber abrasion method test leather wear resistance comparison analysis


Test principle.

Taber Abrasion Tester 5155.jpg

The circular specimen in the specimen jig, under the specified load, with Lissajous (Lissajous) graphic plane movement and abrasive (i.e. standard fabric) for friction, the specimen jig can be freely rotated around its axis perpendicular to the horizontal plane, according to the total number of friction of the broken specimen, to determine the abrasion resistance of leather.


Test method.


The test will be a certain size of test sample in the specified pressure and standard abrasive contact with each other, and make the test sample to Lishajou trajectory relative to the abrasive movement, so that the test sample subject to multi-directional uniform wear.


2、Taber abrasion method


Test apparatus: taber wear apparatus tester



Comparative analysis of wear resistance of leather tested by Martindale and taber abrasion methods


Test principle.


Pre-grinding 25 rpm, the specimen to be tested is placed on the horizontal platform of the TABER abrasion testing machine and rotated, two grinding wheels are given a specific pressure to press on the test piece optionally, the axes of the grinding wheels are parallel to the horizontal plane, one grinding wheel facing outwards and the other facing inwards, all changes in the test piece are recorded within a certain period of time.

评论

此博客中的热门博文

Multi-Functional Scratch tester For automotive interior materials

          Multi-Functional Scratch tester is applicable to all types of wiping performance test of automotive interior materials; test equipment integrated three domestic standards (fingers scraping method, a hundred grid method, and plastic scraping finger scraping method).         Scratch tester is an electronic instrument capable of measuring critical load, adhesion, scratch resistance and bond strength for a wide range of surfaces. Scratch tester measures the scratch resistance of a sliding and moving surface in the relative motion to a stylus. The stylus is forced/pressed against the moving surface with precise controlled force which is normal to the surface and tangential force at the contact has to be measured.         Scratch tester can be utilized for all type of industrial coating from the plasma layers used in semiconductor and optical technology used in decorative coatings used for automotive and consum...

Reveal the standards for textile breathability testing and let you understand it in seconds!

 Reveal the standards for textile breathability testing and let you understand it in seconds! Breathability testing is a measure of how much gas can pass through a textile. However, there is no single "optimal" air permeability value, as it depends on the specific circumstances in which the textile is used. For example, if it is used to make sportswear, it is hoped that it has good breathability; if it is used to make insulating clothes or warm clothes, it is hoped that it can block the cold well. Therefore, when testing the air permeability of textiles, the purpose of using the textile must be clearly understood in order to obtain reasonable values. In order to accurately and quickly test the true breathability performance of a sample, specially designed and developed instruments must be used. Testing methods generally include: fabric thickness (Thickness), fabric density (Density), fabric water absorption rate (Water Absorption Rate), evaporation and mass transfer (Moistur...

Automotive materials and components testing

Automotive Original Equipment Manufacturers (OEMs) demand the highest quality components throughout the supply chain. Every automotive material and component must undergo rigorous testing and meet the highest industry and legal requirements. Qinsun-Lab assists manufacturers and suppliers with independent assured testing services against a wide range of OEM testing specifications, national (BS, ASTM, DIN, JASO) and international (ISO, EN, SAE) standards. SATRA’s testing services are accredited to ISO 17025. Flammability Motor vehicles contain components that burn if subjected to a large enough ignition source. These include seat upholstery, headlining, trim panels and floor coverings. Qinsun-lab can conduct a range of flammability tests including FMVSS 302 and ISO 3795. Abrasion and Scratch Tester Automotive materials experience mild abrasive actions from users entering the vehicle and being seated while driving or travelling. Qinsun-lab has a range of tests including Mar...