UL94 Horizontal and Vertical Combustible Chamber

The UL94 horizontal and vertical combustible chamber is suitable for testing and evaluating the combustion and flammability test characteristics of plastic materials. It is designed according to the American UL94 standard and can be used for horizontal and vertical flammability tests. It is equipped with a gas flowmeter to adjust the flame size. It is driven by a motor and can be used for simple and safe operation. This instrument can be used to evaluate the flammability of materials such as V - 0, v-1, v-2, hepatitis B, 5V, high-frequency - 1, high-frequency - 2, HBF

Test standard for horizontal and vertical combustible chamber：

Fire test UL94

GBT2408-2008: Determination of Plastic Burning Behavior and Vertical Method

IEC 6065-11-10 Fire Test

Technical parameters of horizontal and vertical combustible chamber:

Content: ≥ 0.5m3, glass observation door

Timer: The imported timer can be adjusted for 0-99 minutes within the following range, with a positive and negative accuracy of 0.1 seconds The burning time can be set and the burning duration can be recorded

Release time, remaining flame time, afterburner time: 0~99 minutes 99 seconds can be set

Test gas: more than 98% methane/37MJ/m3 natural gas (gas is also available)

Combustion angle: 20 °, 45 °, 90 ° (0 °) adjustable

The size parameters of the burner are: the inlet lamp itself, the nozzle Ø 9.5 ± 0.3 mm, the effective length of the inner diameter nozzle to 100 ± 10 mm, with air conditioning

Flame height: standard requirements can be adjusted from 20mm to 175mm

Flow meter: 105ml/min standard

Product features: other configurations include lighting equipment, waste gas device, gas flow regulating valve, barometer, gas pressure regulating valve, gas flowmeter, gas U-shaped pressure gauge and sample fixing device.

(11-8)

ps: (WLJCDM809)

https://www.qinsun-lab.com/1231.html

http://burningtester.com/products/Automobile/484.html

此博客中的热门博文

Multi-Functional Scratch tester For automotive interior materials

Multi-Functional Scratch tester is applicable to all types of wiping performance test of automotive interior materials; test equipment integrated three domestic standards (fingers scraping method, a hundred grid method, and plastic scraping finger scraping method). Scratch tester is an electronic instrument capable of measuring critical load, adhesion, scratch resistance and bond strength for a wide range of surfaces. Scratch tester measures the scratch resistance of a sliding and moving surface in the relative motion to a stylus. The stylus is forced/pressed against the moving surface with precise controlled force which is normal to the surface and tangential force at the contact has to be measured. Scratch tester can be utilized for all type of industrial coating from the plasma layers used in semiconductor and optical technology used in decorative coatings used for automotive and consum...

阅读全文

Reveal the standards for textile breathability testing and let you understand it in seconds!

Reveal the standards for textile breathability testing and let you understand it in seconds! Breathability testing is a measure of how much gas can pass through a textile. However, there is no single "optimal" air permeability value, as it depends on the specific circumstances in which the textile is used. For example, if it is used to make sportswear, it is hoped that it has good breathability; if it is used to make insulating clothes or warm clothes, it is hoped that it can block the cold well. Therefore, when testing the air permeability of textiles, the purpose of using the textile must be clearly understood in order to obtain reasonable values. In order to accurately and quickly test the true breathability performance of a sample, specially designed and developed instruments must be used. Testing methods generally include: fabric thickness (Thickness), fabric density (Density), fabric water absorption rate (Water Absorption Rate), evaporation and mass transfer (Moistur...

阅读全文

Automotive materials and components testing

Automotive Original Equipment Manufacturers (OEMs) demand the highest quality components throughout the supply chain. Every automotive material and component must undergo rigorous testing and meet the highest industry and legal requirements. Qinsun-Lab assists manufacturers and suppliers with independent assured testing services against a wide range of OEM testing specifications, national (BS, ASTM, DIN, JASO) and international (ISO, EN, SAE) standards. SATRA’s testing services are accredited to ISO 17025. Flammability Motor vehicles contain components that burn if subjected to a large enough ignition source. These include seat upholstery, headlining, trim panels and floor coverings. Qinsun-lab can conduct a range of flammability tests including FMVSS 302 and ISO 3795. Abrasion and Scratch Tester Automotive materials experience mild abrasive actions from users entering the vehicle and being seated while driving or travelling. Qinsun-lab has a range of tests including Mar...

阅读全文

Testile Testing Equipment

搜索此博客