跳至主要内容

Suitable for elastic materials DIN-53516 abrasion resistance testing machine - efficient and convenient

Suitable for elastic materials DIN-53516 abrasion resistance testing machine - efficient and convenient


DIN-53516 abrasion resistance testing machine is suitable for abrasion testing of elastic materials, rubber, tires, conveyor belts, conveyor belts, soles, soft synthetic leather, leather and other materials. It has the characteristics of high efficiency, good reproducibility and easy operation.


technical parameter:

Wear stroke 40 mm (20 mm) wear speed 0.32 msec inclination 30

Test piece diameter 16 mm thickness 6~15 mm test load 5N, 10N

The lateral displacement of the fixture is 4.2mm/the volume of each roller is 70×30×30cm

Weight 65kg

Power supply 15, AC220V, 3A



1.4 Operating environment

The instrument is intended for use in residential, commercial and light industrial environments and complies with standards BS EN 50081-1 and BS EN50082-1

1.5 Climate and environment

The right to make changes and improvements to its products, but has no obligation to implement improvements and installations on products that have already been produced.

This instrument is operated under the following conditions:

Altitude<2000m

Operating temperature: 13 ~ 30C (56 ~ 86 ℃), relative humidity 25-75% Storage temperature: 10 ~ 43 ° C (50 ~ 110F), relative humidity 20 ~ 80%

The instrument can be placed in the operating environment required by the standard to facilitate the consistency of the sample humidity adjustment and the actual abrasion test.

1.6 Electrical information

The electrical requirements for this instrument comply with EN 61010-1:2001, Measurement, control and laboratory use.

1.7 Installation type and pollution level


TEXTILE TESTING INSTRUMENT

Mask Protective Clothing Testing Equipment

Textile Fabric Abrasion Tester

Accelerated Weathering Tester

ps: (WLJCDM809)


标签：

评论

发表评论

此博客中的热门博文

Multi-Functional Scratch tester For automotive interior materials

          Multi-Functional Scratch tester is applicable to all types of wiping performance test of automotive interior materials; test equipment integrated three domestic standards (fingers scraping method, a hundred grid method, and plastic scraping finger scraping method).         Scratch tester is an electronic instrument capable of measuring critical load, adhesion, scratch resistance and bond strength for a wide range of surfaces. Scratch tester measures the scratch resistance of a sliding and moving surface in the relative motion to a stylus. The stylus is forced/pressed against the moving surface with precise controlled force which is normal to the surface and tangential force at the contact has to be measured.         Scratch tester can be utilized for all type of industrial coating from the plasma layers used in semiconductor and optical technology used in decorative coatings used for automotive and consum...
发表评论
阅读全文

Reveal the standards for textile breathability testing and let you understand it in seconds!

 Reveal the standards for textile breathability testing and let you understand it in seconds! Breathability testing is a measure of how much gas can pass through a textile. However, there is no single "optimal" air permeability value, as it depends on the specific circumstances in which the textile is used. For example, if it is used to make sportswear, it is hoped that it has good breathability; if it is used to make insulating clothes or warm clothes, it is hoped that it can block the cold well. Therefore, when testing the air permeability of textiles, the purpose of using the textile must be clearly understood in order to obtain reasonable values. In order to accurately and quickly test the true breathability performance of a sample, specially designed and developed instruments must be used. Testing methods generally include: fabric thickness (Thickness), fabric density (Density), fabric water absorption rate (Water Absorption Rate), evaporation and mass transfer (Moistur...
发表评论
阅读全文

Test Methods of Universal Pilling Assessment Viewer (PAV)

Universal Pilling Assessment Viewer enables fabric to be assessed while still mounted on a Martindale head. The Pilling Assessment Viewer (PAV) for the textile market has been developed with the help of a major textile company in accordance to BN EN ISO 12945 standards incorporating all 3 parts and adopting the following test methods: Part 1: ICI Pilling box method (BS 5811) Part 2: Modified Martindale method (SN 198 525) Part 3: Atlas random tumble method (ASTM D 3512-96) It uses D65 Artificial Daylight (with CWF optionally available), as specified by many retailers. Other test methods can also be viewed, including those specified by major retailers. Other results of test methods that can be viewed include: BS 5811:1986 Determination of resistance to pilling and change of appearance of fabrics. ICI modified pill box for snagging Fleece appearance and surface change after washing Other test methods as specified by several major retail outlet. To optimize c...
1 条评论
阅读全文