跳至主要内容

Mask respiratory resistance tester-textile testing equipment

 Mask respiratory resistance tester-textile testing equipment


Mask respiratory resistance tester/textile testing and testing equipment is a testing instrument developed and produced by Shanghai Qianshi Precision Electromechanical Technology Co., Ltd., the production factory of Standard Group, with high cost performance and fast and complete after-sales service.


Applicable standard:

GB/T2626-2019 Respiratory protective equipment Self-priming filter anti-particulate respirator 6.5 inhalation resistance 6.6 exhalation resistance

GB/T32610-2016 Technical specification for daily protective masks 6.7 Inhalation resistance 6.8 Exhalation resistance

GB/T2890-2009 Respiratory protection self-priming filter gas mask 6.9

YY/T0969-2013 Disposable medical mouthpiece 4.6 Ventilation resistance



basic introduction:

Mask respiratory resistance tester/textile testing and testing equipment is a testing instrument developed and produced by Shanghai Qianshi Precision Electromechanical Technology Co., Ltd., the production factory of Standard Group, with high cost performance and fast and complete after-sales service.


The main purpose:

It is suitable for the relevant testing and inspection of medical masks, medical surgical masks, disposable medical masks, ordinary masks, dust-proof masks, and anti-fog masks by mask manufacturers and national labor protection equipment inspection agencies. Inspiratory and exhalation resistance under specified conditions.



Applicable standard:

GB/T2626-2019 Respiratory protective equipment Self-priming filter anti-particulate respirator 6.5 inhalation resistance 6.6 exhalation resistance

GB/T32610-2016 Technical specification for daily protective masks 6.7 Inhalation resistance 6.8 Exhalation resistance

GB/T2890-2009 Respiratory protection self-priming filter gas mask 6.9

YY/T0969-2013 Disposable medical mouthpiece 4.6 Ventilation resistance


The main parameters:

1. Flow meter range: 0L/min～100L/min, accuracy is ±2%;

2. Micromanometer range: -1000Pa～1000Pa, accuracy is 1Pa;

3. Suction pump air volume: not less than 100L/min;

4. Constant ventilation: (85±1) L/min;

5. Equipment power supply: AC220V, 50Hz.


After-sales service:

1. The company has been engaged in testing instruments for more than 20 years and has a strong after-sales service team;

2. Be able to deal with various problems in a timely and fast manner, and relieve customers from worries;

3. Spare parts are available to solve the trouble of long lead time for ordering spare parts;

4. Provide outsourced maintenance services;

5. Long-term supply of various commonly used testing instruments;

6. We keep up with the update of industry standards and provide testing instruments that meet the new standards in a timely manner.

ps: (WLJCDM809)

https://www.qinsun-lab.com/News-and-events/1989.html

https://www.standard-groups.com/en/TextileGarment/1283.html

tag:mask and respirator breathing resistance tester,mask inhalation and exhalation tester,mask breathing resistance tester,mask respiratory resistance tester,mask respirator breathing resistance tester,mask & respirator breathing resistance tester

评论

发表评论

此博客中的热门博文

Multi-Functional Scratch tester For automotive interior materials

          Multi-Functional Scratch tester is applicable to all types of wiping performance test of automotive interior materials; test equipment integrated three domestic standards (fingers scraping method, a hundred grid method, and plastic scraping finger scraping method).         Scratch tester is an electronic instrument capable of measuring critical load, adhesion, scratch resistance and bond strength for a wide range of surfaces. Scratch tester measures the scratch resistance of a sliding and moving surface in the relative motion to a stylus. The stylus is forced/pressed against the moving surface with precise controlled force which is normal to the surface and tangential force at the contact has to be measured.         Scratch tester can be utilized for all type of industrial coating from the plasma layers used in semiconductor and optical technology used in decorative coatings used for automotive and consum...
发表评论
阅读全文

Reveal the standards for textile breathability testing and let you understand it in seconds!

 Reveal the standards for textile breathability testing and let you understand it in seconds! Breathability testing is a measure of how much gas can pass through a textile. However, there is no single "optimal" air permeability value, as it depends on the specific circumstances in which the textile is used. For example, if it is used to make sportswear, it is hoped that it has good breathability; if it is used to make insulating clothes or warm clothes, it is hoped that it can block the cold well. Therefore, when testing the air permeability of textiles, the purpose of using the textile must be clearly understood in order to obtain reasonable values. In order to accurately and quickly test the true breathability performance of a sample, specially designed and developed instruments must be used. Testing methods generally include: fabric thickness (Thickness), fabric density (Density), fabric water absorption rate (Water Absorption Rate), evaporation and mass transfer (Moistur...
发表评论
阅读全文

Test Methods of Universal Pilling Assessment Viewer (PAV)

Universal Pilling Assessment Viewer enables fabric to be assessed while still mounted on a Martindale head. The Pilling Assessment Viewer (PAV) for the textile market has been developed with the help of a major textile company in accordance to BN EN ISO 12945 standards incorporating all 3 parts and adopting the following test methods: Part 1: ICI Pilling box method (BS 5811) Part 2: Modified Martindale method (SN 198 525) Part 3: Atlas random tumble method (ASTM D 3512-96) It uses D65 Artificial Daylight (with CWF optionally available), as specified by many retailers. Other test methods can also be viewed, including those specified by major retailers. Other results of test methods that can be viewed include: BS 5811:1986 Determination of resistance to pilling and change of appearance of fabrics. ICI modified pill box for snagging Fleece appearance and surface change after washing Other test methods as specified by several major retail outlet. To optimize c...
1 条评论
阅读全文