Testile Testing Equipment

      Cut-resistant gloves are designed to protect hands from direct contact with sharp edges such as glass, metal, ceramics and other materials. Cut resistance is a function of a glove’s material composition and thickness.You can increase the level of cut protection by increasing material weight (i.e., ounces per square yard); by using high-performance materials such as Dyneema®, Kevlar®, and metal mesh; or by using composite yarns made with varying combinations of stainless steel, fiberglass, synthetic and high-performance yarns.      For a glove manufacturer ,you need refer to a test machine to know how your gloves perform on the anti-cut performance . Anti Cut Glove Testing Machine is use to determine the protective capability of the safety glove against cutting.But,it is not available for safety glove made by hard material.A driving rotation found blade under a specified load cuts the glove held by the fixture of tester to and fro. After test ,compar...

      Horizontal vertical flame tester is to simulate the electrical environment around the electrical environment of the early situation,to simulate the technology to assess the risk of fire, and to make sure the product around the fire that will not cause burning spread. Test equipment for electrical and electronic household appliances parts, parts and components, such as: household appliances, insulation shell, switch panels, printed circuit boards and insulation materials.          Horizontal and vertical flame chamber is designed for combustible performance testing of equipment and appliance parts. Many of the test indicators for end using such as flammability, combustion rate, flame spread, combustion strength and flame retardancy of the product are Was detected. High degree of automation, accurate test data, is our high demand for users to launch the latest tester. Horizontal Vertical Combustion Tester Experimental Operation Met...

      Rubber is polymeric material endowed with the properties of flexibility and extensibility: with the application of force, the molecules straighten out in the direction in which they are being pulled; on release from being extended, they spontaneously recover their normal, random arrangements. Rubbers include natural rubber, a naturally occurring substance obtained from the exudations of certain tropical plants, and synthetic rubbers, artificially derived from petrochemical products. Among the most important synthetics are styrene-butadiene, polybutadiene, and polyisoprene (commonly classified as the "general purpose"), as well as ethylene-propylene rubber (often referred to as "specialty rubber").        For rubber,“abrasion” covers all mechanisms, whereas the word “abrasion” for other materials refers in particular to scoring by hard, sharp particles. In the absence of transient effects such as clogging of the abrasive or evolution of an a...

      Automatic air permeability tester can quickly and accurately assess air permeability of various materials such as wovenfabrics, knitted fabrics, non-woven fabrics, industrial filter materials, as well as paper and foam products.                         air permeability tester , to test the resistance of fabrics (woven, knitted and non woven textile materials) to the passage of air (air flow) under constant pre-set air pressure while firmly clamped in the test rig of selected test head/area.                                The specimen is loaded to the test area of the    Automatic air permeability tester  easily by means of an automatic holder. By pressing down the holder to start the test. Aih’jr permeability tester equipped with a vacuum pump to draw air through an automatic interchangeable t...

     Specimens cut from the blanket fabric are prepared by brushing if they have a raised fiber surface and by drying. The dried specimen is held in a special apparatus, a standardized flame is applied to the surface for a specified time under controlled conditions, and burning, charring, or discoloration of a paper monitor is noted. Two classes of flammability are described.      This test method of  Blanket Flammability Tester  should be used to measure and describe the properties of materials, products, or assemblies in response to heat and flame under controlled laboratory conditions and should not be used to describe or appraise the fire hazard or fire risk of materials, products, or assemblies under actual fire conditions. However, results of this test may be used as elements of a fire risk assessment which takes into account all of the factors which are pertinent to an assessment of the fire hazard of a particular end use.A burn of suf...

      Cut-resistant gloves are designed to protect hands from direct contact with sharp edges such as glass, metal, ceramics and other materials. Cut resistance is a function of a glove’s material composition and thickness.You can increase the level of cut protection by increasing material weight ; by using high-performance materials such as Dyneema , Kevlar , and metal mesh; or by using composite yarns made with varying combinations of stainless steel, fiberglass, synthetic and high-performance yarns.            Performance characteristics of    Cut-resistant gloves  are not only affected by a material’s weight, but also by the coatings applied to the outside surface. Lighter-weight styles offer more dexterity, resulting in less hand fatigue, while their heavier counterparts generally provide more cut and abrasion protection. Coated gloves enhance grip, especially on slippery surfaces. However, some coated gloves may not be...

The perspiration tester is used for the test of fading or dyeing-movement in textile, which were soaked by sweat, chloride water, seawater or distilled water.The Perspiration Tester is widely used in determining the color fastness of textiles to perspiration, sea water, saliva and distilled water. The colored textile specimen combined together with the prescribed  lining fabric is wet out in a simulated acid perspiration solution or others. This perspiration tester determines colorfastness of textiles to human perspiration. The Perspiration Tester consists of two stainless steel frames. Each frame be loaded with up to 20 samples of 10 x 4 cm between the supplied acrylic separator plates. Loading weights for AATCC TM 15/106/107 and ISO 105 E01/2/4 are included. A stainless steel frame with a capacity of 20 samples of 10 cm x 4 cm held between acrylic separator plates, loading weights not included. An electric incubator is required and offered separately.  ...