Testile Testing Equipment

  Carbon arc aging chamber is mainly used to simulate the destructive effects of ultraviolet rays, temperature, humidity and other factors in natural climate on materials, and accelerate the aging process of materials through the radiation generated by carbon arc lamps. It is often used in industries such as plastics, rubber, and coatings to help evaluate the aging resistance of materials in order to improve product quality and extend service life. Working principle:  Using a carbon arc lamp as a radiation source, it can produce radiation similar to ultraviolet rays in sunlight. At the same time, it can also control the temperature and humidity in the box, simulate natural environmental conditions, and allow the material to undergo a long-term natural aging effect in a short period of time. Structural composition:  The main body is a sealed test box with a sample rack inside for placing the material to be tested; equipped with a carbon arc lamp and related optical systems...

  Introduction The sweating thermal manikin test system simulates the physical mechanism and heat exchange from the outside world. Obtain the thermal resistance, wet resistance and clo value of the material by the manikin monitoring results, and the influence of different clothing on the thermal comfort manikin is obtained by analyzing the software data.Thermal manikin test system can characterize the impact of different clothing on human comfort performance by measuring the heat balance and the results of human comfort between heat generation of dressed manikin and the external environment. Then, guide the fabric and clothing development for the special using conditions of the comfort.Thermal manikin test system with data analysis software present human sensory conclusions through the data. It avoids the real human test to achieve the uniform data results. Reduce the difference in results caused by differences in personal perception. It is applicable to thermal insulation properti...

  Dynamic Filter Tester   is su itable for professional filter test. It is used to evaluate the baghouse filter and bag dynamic and static dust removal efficiency, filter performance test instrument designed by the analog filter in the actual use of the real situation, the use of quick access to media performance evaluation parameters, an accurate assessment of the filter material quality, performance and service life. Provide data basis for research and development, product quality control, material properties with the new type of filter material; it is a good choice for scientific research, testing, production and other industrial areas of product performance verification. Testing Standards: ISO 11057 Air quality - Test method for cleanable filter media filter performance ASTM D6830 test method for determining the pressure drop cleanable filter media and filtration performance VDI / DIN3926 evaluation of cleanable filter Standard Test Method GB / T 6719 baghouse technol...

  Air Permeability Tester Air Permeability Tester of textile fabrics complies with ASTM D737, ISO 9237/7231, BS 5636, etc. It is used to test the resistance of the flow of air through fabrics. There is different air permeability test method to do air permeability testing for textiles, we can offer all the test methods and competitive price.   Testing Standards: BS 5636, JIS L1096-A, DIN 53887, ASTM D737, ASTM D3574, EN ISO 9237, GB/T 5453, EDANA 140.2, TAPPI T251, EDANA 140.1, ASTM D737, AFNOR G07-111, ISO 7231   Applications: The Air Permeability Tester accurately and swiftly determines the resistance of fabrics (woven, knitted and nonwoven textile) to the passage of air (air flow) under constant pre-set air pressure while firmly clamped in the test rig of selected test head/area. The air permeability of the fabric is calculated automatically within a short time.

  Martindale Abrasion And Pilling Tester Martindale Abrasion & Pilling Tester. To determine the abrasion and pilling resistance of all kinds of textile structures. Samples are rubbed against known abrasives at low pressures and in continuously changing directions. The amount of abrasion or pilling is compared against standard parameters. The unique design of our Martindale abrasion tester allows removal of individual sample holders for examination without lifting the top motion plate. It provides individual counters and parking function, interval time settable and a large touch-screen display. Standard sample holders and 9 and 12kpa Weights are included. The  Martindale abrasion tester  is available with 4, 6, 8 or 9 test positions. Testing Standards: ASTM D4970, ISO 12945.2, GB/T 4802.2/13775/21196.1/21196.2, ASTM D4966, ISO 12947, FZ/T 20020, BS 3424-24/5690, ISO 12947.1/12947.2, M&S P17/P19/P19C, NEXT 18/18a/18b, ISO 5470-2, IWTO-40, JIS L1096 8.17.5 Method E, ...

Friction color fastness test instruments  is designed with a base, rubbing rotation mechanism and a counter. Fix the specimen and sand paper with the specimen clamp on one side of the base. Rotate the knob to rub the friction head with the white cotton cloth against the specimen in reciprocation motion with specified strokes. After ten times of friction between the white cloth and the specimen, assess the color transfer to the white cloth with a gray scale and the stability of dyed fabric specimen or surface coating so as to provide reference data for material assessing and selection. Rubbing fastness tester  is used to determine the colour fastness of cotton, chemical fiber, blended, other coloured fabrics and leather to dry or wet rubbing, suitable for frequent use and long run tests. A piece of dyed test cloth and a piece of white cotton cloth are rubbed against each other though the tester in a specific pressure and stroke. Product Information and Features: Electronic Croc...

  Product Information:   The  color fastness to perspiration tester  is widely used in determining the color fastness to perspiration, sea water, saliva, distilled water and in textiles. The colored textile specimen is wet out using a simulated acid perspiration solution or others, and placed in contact with a multi-fiber strip. Extrusion to remove excess liquid of the combination, then subjected to a fixed mechanical pressure for a pre-determined period. Following incubation, the Perspirometer is removed and specimens and multi-fiber strip are observed the charge of color after drying respectively. Applications:   The Perspiration Tester is designed for color fastness test to perspiration, sea water, saliva, distilled water and in colored textiles. Accessories and Consumables:   1.Standard weights   2.Acrylic Plates   3.Sodium Chloride   4.Sodium Dihydrogen Orthophosphate·2H2O   5.Di-Sodium Hydrogen Orthophosphate·2H2O   6.Lactic A...