跳至主要内容

Rubbing colour fastness tester

Friction color fastness test instruments is designed with a base, rubbing rotation mechanism and a counter. Fix the specimen and sand paper with the specimen clamp on one side of the base.

Rotate the knob to rub the friction head with the white cotton cloth against the specimen in reciprocation motion with specified strokes. After ten times of friction between the white cloth and the specimen, assess the color transfer to the white cloth with a gray scale and the stability of dyed fabric specimen or surface coating so as to provide reference data for material assessing and selection.

Rubbing fastness tester is used to determine the colour fastness of cotton, chemical fiber, blended, other coloured fabrics and leather to dry or wet rubbing, suitable for frequent use and long run tests. A piece of dyed test cloth and a piece of white cotton cloth are rubbed against each other though the tester in a specific pressure and stroke.

Product Information and Features:

Electronic Crockmeter is used to determine colour fastness of materials to wet and dry rubbing, suitable for frequent use and long run tests

A.Diameter of friction head:16mm or 25mm;

B.The weight to produce a loading of 9N;

C.Electric drive, working voltage of 220V;

D.Equipped with electronic counter, could completely simulate the results of manual friction for 10 times, with high reproducibility;

E.The fixed device for the standard crocking cloth;

F.A steel spring clip for rapidly fastening samples;

G.Control mode consists of AATCC, ISO standards, and customized setting;

H.Automatic alarm to remind the test over.

Accessories and Consumables:

1.The Crocking Cloth Clamps;

2.Standard Emery Paper For Crockmeter;

3.Pre-cut White Crocking Cloths for AATCC/ISO;

4.Pre-cut White Crocking Cloths for SDC;

5.Crockmeter Calibration Fabric;

6.Grey Scale (Staining) ISO/BS Standards;

friction color fastness test instruments

评论

此博客中的热门博文

Chrysler Bending Tester

  Brief Introduction Chrysler bending tester is designed for bending and folding manner by testing base fabric adhesion of the coating material, ie mechanical stability of the coating.  Design Basis Chrysler laboratory test method LP-463LB-9-01.  This test characterizes the degree of adhesion about the vinyl coated fabric and leather fabric coating material. Also it can be vinyl coated fabrics, leather, unsupported rupture, whitening, cracking, lamellar separation of vinyl and other soft furnishings and other materials Product Description: A tester simultaneously tests four samples, including three bend specimens and a folded specimen. When the bending jig sample is clamped at both ends, and taut, holding one end is fixed and the other end of the horizontal movement, the bending test.  The folded ends of the sample close clamped between two opposing plates, a 12lb load is applied in the folding area. If possible, close the flat to exert the appropriate pressure....

Tinuvin 1130: An Excellent UV Absorber

 In the field of the chemical industry, UV absorbers play a crucial role, particularly in protecting materials from UV damage. Today, we will delve into a highly regarded UV absorber—Tinuvin 1130. Tinuvin 1130 : chemical name: 3-(3-(2H-benzotriazole-2-yl)-4-hydroxy-5-tert-butyl phenyl)propionic acid polyethylene glycol 300 ester; CAS login number: 104810-48-2. This product is an exceptional UV absorber that offers numerous benefits due to its unique properties. One of the standout features of Tinuvin 1130 is its excellent weather resistance. It has a strong ability to absorb ultraviolet rays, particularly those with wavelengths ranging from 290-400nm. This effectively prevents coatings, plastics, rubber, and other materials from being damaged by UV rays, thereby maintaining the performance and appearance stability of these materials and extending their service life. In addition, Tinuvin 1130 exhibits good compatibility. It is easy to emulsify in water-based systems and can be...

Medical Mask Synthetic Blood Penetration Tester

Surgical Masks Synthetic Blood Penetration Resistance Tester Medical Face Mask Synthetic Blood Penetration Resistance Tester is mainly used in the blood penetration test of masks, which ensures that medical masks can have enough protection to prevent the penetration of blood after splashing from bringing danger to users. It is an essential part of mask test, especially for medical masks. Face Mask Synthetic Blood Penetration Resistance Tester can be used not only to detect synthetic blood penetration resistance of medical masks, but also to detect other textile coating materials. When in use, it can be used to detect different directions only by adjusting the appropriate parameters, thus improving the practicability and working efficiency of the equipment to the greatest extent. Mask Synthetic Blood Penetration Tester  Standards: GB 19083-2010 Technical requirements of medical face masks - Anti-penetration property of 5.5 synthetic blood. YY/T 0691-2008 Clothing for protection agai...