跳至主要内容

How To Detect The Flammability Of Textiles

According to the organizational structure of textiles, the use of raw materials, processing technology, texture, appearance and the main use of fourteen categories. Ancient textiles are basically fabricated according to fabric, fabric pattern, fabric color. Modern silk used a lot of old names, such as crepe, silk, silk, silk, also used some foreign words, such as Georgette (georgette), taffeta (taffeta) and so on. According to the organizational structure of textile varieties, the use of raw materials, processing technology, texture, appearance and the main use, can be divided into yarn, Luo, Ling, silk, spinning, raw silk, crepe, brocade, satin, Ti, Ge, And other fourteen categories.

People living and wearing can not be separated from textiles, textiles is the necessities of people's survival, although China's use of textiles in public places has been put forward more stringent safety requirements of Flammability, but with the United States, Canada and other developed countries, General use and decoration of textiles but the lack of uniform and clear Flammability safety requirements. Some experts recommend that this requirement be included in the relevant mandatory standards, as product quality supervision and sampling items. China Textile Industry Standardization Institute senior engineer Zhang Hui in the introduction of these data, the expression of some heavy: "In the past people frequently used in daily life such as home clothes, pajamas and other clothing, as well as curtains, curtains and other decorative textiles flame retardant But in recent years, in daily life due to clothing flammable fire caused by frequent accidents at home and abroad, making people on the textile and clothing products, more and more attention to the flame retardant performance.

    For textiles, the Flammability is a very important quality indicator. According to reports, the burning performance of textiles can generally use the flame spread rate, burning time, flame retardant time and damage length and other indicators to characterize. In general, the smaller the flame spread rate of the fabric, the shorter the sequestration time, the relatively slow ignition time at the point of contact with the fire source, and gives people the ability to react for time to get rid of the fire burns on the body or to prevent the fire from happening. Therefore, the burning performance of textiles is an important indicator of life safety. Flammability refers to the nature of the material that has or the material has been postponed to delay the spread of the flame.

评论

此博客中的热门博文

Multi-Functional Scratch tester For automotive interior materials

          Multi-Functional Scratch tester is applicable to all types of wiping performance test of automotive interior materials; test equipment integrated three domestic standards (fingers scraping method, a hundred grid method, and plastic scraping finger scraping method).         Scratch tester is an electronic instrument capable of measuring critical load, adhesion, scratch resistance and bond strength for a wide range of surfaces. Scratch tester measures the scratch resistance of a sliding and moving surface in the relative motion to a stylus. The stylus is forced/pressed against the moving surface with precise controlled force which is normal to the surface and tangential force at the contact has to be measured.         Scratch tester can be utilized for all type of industrial coating from the plasma layers used in semiconductor and optical technology used in decorative coatings used for automotive and consum...

Reveal the standards for textile breathability testing and let you understand it in seconds!

 Reveal the standards for textile breathability testing and let you understand it in seconds! Breathability testing is a measure of how much gas can pass through a textile. However, there is no single "optimal" air permeability value, as it depends on the specific circumstances in which the textile is used. For example, if it is used to make sportswear, it is hoped that it has good breathability; if it is used to make insulating clothes or warm clothes, it is hoped that it can block the cold well. Therefore, when testing the air permeability of textiles, the purpose of using the textile must be clearly understood in order to obtain reasonable values. In order to accurately and quickly test the true breathability performance of a sample, specially designed and developed instruments must be used. Testing methods generally include: fabric thickness (Thickness), fabric density (Density), fabric water absorption rate (Water Absorption Rate), evaporation and mass transfer (Moistur...

Test Methods of Universal Pilling Assessment Viewer (PAV)

Universal Pilling Assessment Viewer enables fabric to be assessed while still mounted on a Martindale head. The Pilling Assessment Viewer (PAV) for the textile market has been developed with the help of a major textile company in accordance to BN EN ISO 12945 standards incorporating all 3 parts and adopting the following test methods: Part 1: ICI Pilling box method (BS 5811) Part 2: Modified Martindale method (SN 198 525) Part 3: Atlas random tumble method (ASTM D 3512-96) It uses D65 Artificial Daylight (with CWF optionally available), as specified by many retailers. Other test methods can also be viewed, including those specified by major retailers. Other results of test methods that can be viewed include: BS 5811:1986 Determination of resistance to pilling and change of appearance of fabrics. ICI modified pill box for snagging Fleece appearance and surface change after washing Other test methods as specified by several major retail outlet. To optimize c...