Qinsun Vertical Flammability Chamber for measuring the vertical flame spread for sleepwear, fabrics, other textile materials or resilient filling materials used in upholstered furniture. Comprises a draft free stainless steel cabinet with observation window and back wall painted black for easy test viewing. The different specimen holders and associated hardwares are dependent on the test standards. Automatic Gas Control System could easily control the combustion process.
Fabric vertical flammability tester is used for measuring the vertical flame spread of children’s sleepwear, fabrics (fabric burn test), and other textile materials or resilient filling materials used in upholstered furniture.
Whether the sample and the sample rack are accurately installed is an important factor that affects the vertical burning test.
When cutting the sample, you should try to cut flat and wrinkle-free samples. The upper and lower ends of the sample should be trimmed flush, the size should be as accurate as possible.
When placing the specimen on the specimen holder, care should be taken so that the lower end of the specimen is flush with the lower end of the specimen holder to ensure accurate measurement of the length during the vertical burning test.
Suspension of the sample holder should be hanging vertically above the igniter, not tilted. The sample can be equally divided in the ignition flame.
-------------------------------------------------------------------
For more information about our testing instrument, please contact
·website:http://www.qinsun-lab.com/
· +86-21-6780 0179
· info@qinsun-lab.com
· or leave your comments below
Fabric vertical flammability tester is used for measuring the vertical flame spread of children’s sleepwear, fabrics (fabric burn test), and other textile materials or resilient filling materials used in upholstered furniture.
Whether the sample and the sample rack are accurately installed is an important factor that affects the vertical burning test.
When cutting the sample, you should try to cut flat and wrinkle-free samples. The upper and lower ends of the sample should be trimmed flush, the size should be as accurate as possible.
When placing the specimen on the specimen holder, care should be taken so that the lower end of the specimen is flush with the lower end of the specimen holder to ensure accurate measurement of the length during the vertical burning test.
Suspension of the sample holder should be hanging vertically above the igniter, not tilted. The sample can be equally divided in the ignition flame.
-------------------------------------------------------------------
For more information about our testing instrument, please contact
·website:http://www.qinsun-lab.com/
· +86-21-6780 0179
· info@qinsun-lab.com
· or leave your comments below
评论
发表评论