ASTM D3512 Random pilling tester BE Used to test the pilling performance of fabrics. Put the samples of 105mm×105mm into the test box respectively. Under the rotation of the impeller, the cork lining of the storage box will continue to rub randomly. Set the timer to the specified time. When the set time is reached, an alarm will sound to indicate the end of the test. During the test, compressed air will be injected into the test chamber to enhance the turning, and the air pressure can be adjusted.
Standards compliant:
ASTM D3512, GB/T 4802.4, ISO 12945.3, JIS L1076-D
technical parameter:
1. Sample testing room: 4;
2. Each test chamber is equipped with rotating stainless steel blades;
3. Equipped with a test room that requires good sealing;
4. Equipped with digital electronic counter;
5. Equipped with an alarm device at the end of the experiment;
6. Equipped with pressure gauge and timer.
7. Drum specification: 146×152mm
8. Specifications of cork lining: 452×146×1.5mm (L×W×H)
9. Stirring rod specification: L=121mm
10. Speed: 1200r/min
11. Compressed air: 0.014-0.021MPa
Instrument configuration:
1. Standard control chart;
2. Cork lining 50 sheets/pack;
3. Cotton sliver 9 meters;
4. Silent air compressor (optional);
5. Other necessary accessories recommended by the manufacturer.
ps: (WLJCDM809)
https://www.qinsun-lab.com/6.html
Mask Particle Filtration Efficiency (PFE) Tester
评论
发表评论