Testile Testing Equipment

Surgical Masks Synthetic Blood Penetration Resistance Tester Medical Face Mask Synthetic Blood Penetration Resistance Tester is mainly used in the blood penetration test of masks, which ensures that medical masks can have enough protection to prevent the penetration of blood after splashing from bringing danger to users. It is an essential part of mask test, especially for medical masks. Face Mask Synthetic Blood Penetration Resistance Tester can be used not only to detect synthetic blood penetration resistance of medical masks, but also to detect other textile coating materials. When in use, it can be used to detect different directions only by adjusting the appropriate parameters, thus improving the practicability and working efficiency of the equipment to the greatest extent. Mask Synthetic Blood Penetration Tester  Standards: GB 19083-2010 Technical requirements of medical face masks - Anti-penetration property of 5.5 synthetic blood. YY/T 0691-2008 Clothing for protection agai...

  Brief Introduction Chrysler bending tester is designed for bending and folding manner by testing base fabric adhesion of the coating material, ie mechanical stability of the coating.  Design Basis Chrysler laboratory test method LP-463LB-9-01.  This test characterizes the degree of adhesion about the vinyl coated fabric and leather fabric coating material. Also it can be vinyl coated fabrics, leather, unsupported rupture, whitening, cracking, lamellar separation of vinyl and other soft furnishings and other materials Product Description： A tester simultaneously tests four samples, including three bend specimens and a folded specimen. When the bending jig sample is clamped at both ends, and taut, holding one end is fixed and the other end of the horizontal movement, the bending test.  The folded ends of the sample close clamped between two opposing plates, a 12lb load is applied in the folding area. If possible, close the flat to exert the appropriate pressure....

The textile airflow resistance tester is used to determine the anti-penetration properties of ordinary fabrics and medical protective masks to airflow at a constant flow rate . It is mainly used for the determination of air penetration of textiles ,cotton, and space cotton. The tester is one of the important means to identify the comfort and hygiene of clothing textiles, especially medical textiles.   Standards  BS En 14683-2005  Surgical masks - Requirements and test methods  GB 19083-2010 Technical requirements of surgical masks GB2626-2006  Respiratory protective products-Self-priming filtering particulate respirator overview YY 0469-2011 Surgical masks YYT 0969-2013  Disposable surgical masks   Features  The instrument consists of a air source that can regulate the flow rate, a sample holding device, and an air pressure measurement system. Sample chuck made of stainless steel with built-in rubber washer ensures that the gas leak will not occur...

Static honest meter is professional designed to determine the attenuation of static electricity, corona discharge time, static voltage attenuation half-life, static decay curve and other electric property of fiber, yarn, fabric, textile or plate materials. It is suitable for measuring the diffusibility of static in the testing samples. Standard： JIS L 1094 GB/T 12703 Static Honest Meter Feature： Static Decay Meter is an analyzing and computing unit which can automatically compute the half-life period of voltage decay from the static decay carve obtained from the host meter. By connecting the analyzer and the honest meter together, it is possible to measure the attenuation of materials automatically in one-touch action. Separation design of tester and controller is easy and safe to operate. Digital voltmeter will display the testing results. Automatically stop for high voltage and motor. Optional data analysis software can provide more detailed information and results.  

  Synthetic Blood Penetration Tester is used for the determination of resistance of penetration by the synthetic blood under the different levels of test pressure to medical protective clothing.   A specimen medical face mask is supported on an apparatus. A fixed volume of synthetic blood is sprayed horizontally at the specimen mask to simulate the scenario of a mask being splashed by a punctured blood vessel. The volume of fluid, distance to impact, orifice size and fluid velocity are defined in their methods and intended to be consistent with this health care scenario.   This test is required by ASTM F2100 and is tested in compliance with ASTM F1862, ASTM F2100, EN 14683, and ISO 26609. Nelson Labs’ highly experienced staff provides a one-stop shop for all ASTM F2100 and EN 14683 testing.   Feature: 1.With one or four working position, can test one or four specimen simultaneously. 2.Single-chip microcomputer automatic control, automatic timing, automatic alarming o...

  Description: The latest G506 mask automatic filter performance tester uses the most advanced technology and design concepts, to meet a variety of test standards and the latest National standard GB / T 32610.Only relatively little operation is required to  complete all the function and operation . Hardware performance of G506 mask automatic filter performance tester is stable and excellent in repeatability. Software design meet with people's thinking mode, the interface is user-friendly, and the functional and parameter settings are very reasonable. It is convenient to user  for  academic research and product development.   Application: G506 Mask Automatic Filter Performance Tester is used for  testing  professional filter material and filtration efficiencyof a wide range of air filters including HEPA and ULPA filter, respirator, filter cartridge and protective clothing test. It also can use salt or oil mist to test filter media. Rapid acquisition of ...

  Brief Introduction The textile ozen aging color fastness tester is mainly used for testing color  fastness properties of fabrics exposed to ozone environment; it is the special equipment for testing the  fabric colorfastness to ozone.    Product Description 1. Equipped with a high efficiency ozone generator. It is also equipped with HMOS sensor, ozone concentration of 5ppm, control accuracy of ± 20%, with a durable ccounters. When the tank is full load for test, the ozone concentration can reach 5ppm in about  five minutes; 2. Stainless steel test chamber is equipped with a large UV glass observation window, and can acheive closed-loop control of the ozone concentration.The rotating sample holder can  hold up to 24 samples. The automatic shut-off featured LED lights improve the observance of the test effect; 3. In order to improve the safety performance of the device, it is equipped with door safety  interlock,ozone decomposition catalyst and ex...

  This product uses fluorescent UV lamps, combined with temperature and humidity device  to simulate the material decline in color, brightness, strength and cracking, spalling, powder, oxidation damage via the high temperature sun light (UV), high humidity, condensation, dark cycle etc. At the same time, through the synergy between UV and moisture resistance ability of single or single material makes wet ability weakening or failure, which is widely used to evaluate the performance of weather resistant materials, equipment is to provide the best sunshine UV simulation. Usage and maintenance are of low cost, easy to use.  Equipment uses program controller can automatic control the test cycle, with high automatic high degree. In addition, it has stable light performance and high rate of repetition test results.   The  UV aging test chamber  is suitable for all kinds of geo-synthetics, such as light resistance, weather resistance and light ageing The exposure ...

  The air-cooled xenon lamp aging tester is a device that uses an air-cooled system to dissipate heat and a xenon lamp to simulate ultraviolet light, visible light and infrared light in natural sunlight to perform accelerated aging tests on materials. It is commonly used in industries such as automobiles, coatings, plastics, rubber, and textiles. It can evaluate the aging resistance of materials under the combined effects of long-term light, temperature, humidity and other environmental factors in a relatively short period of time, helping companies improve product quality, extend service life, and optimize product anti-aging formulas and processes. Structural composition:  The main body is a test chamber, equipped with a xenon lamp and a matching optical filter system to simulate sunlight of different wavelengths, as well as temperature, humidity, lighting time and other control and adjustment devices, as well as an observation window and a sample rack. Working principle: The...

  The   Xenon lamp aging test chamber   is a photoaging tester for large-capacity textile testing. With additional sample light frame, temperature sensor and easy to aging filter. 220 can test 38 samples at the same time, with 150S + double capacity. Large-capacity test box combined with the efficient use of hydropower to make it the most economical air-cooled tester. Applications: Weather-Ometer and Fade-Ometer with their advanced digital control systems, represent monumental achievements in applying digital and optical technologies in easy-to-use laboratory weathering instruments. The Series is approved by many OEMs in the textiles, paints & coatings and plastics industries as the exclusive platform to deliver accurate, reproducible and repeatable results for predicting service life. The Series has been certified CE, UL, CSA, ISO and EN compliant. Standards: AATCC 16-2004, AATCC TM169, ISO 105-B04, M & S C9, M & S C9A, GB / T 8427. Features: ◆ Xenon Lam...