Testile Testing Equipment

The mask tensile testing machine uses a servo motor drive system to drive the beam to move up and down to realize the test loading process. It has a wide range of loading speed and force measurement, and has higher accuracy and sensitivity for the measurement and control of load, deformation and displacement. It can also perform automatic control tests of constant velocity loading, constant velocity deformation and constant velocity displacement, and has low cycle time. Load cycle, deformation cycle, displacement cycle and other functions. It is mainly suitable for stretching in industries such as wire, foil, rubber and plastic, food packaging, composite materials, elastomers, wood products, biological materials, paper products, foam materials, textile fibers, wires and cables, adhesives, connectors, etc. , compression, bending, bending, shearing, peeling, tearing, puncture, breaking and other tests. Metallurgy industry, petrochemical industry, aerospace, shipbuilding industry, machin...

  In November, the raw material purchasing index was 45.73, down 1.62 from October. From the perspective of market price, the domestic cotton futures price rose slightly, while the spot price kept falling and the decline widened; In terms of chemical staple fiber, the price of polyester staple fiber continued to fall, and the price of viscose staple fiber remained stable after the fall in the first ten days, with the decline narrowing month on month. Specific data: the average monthly spot price of domestic 3128 grade cotton was 14354 yuan/ton, a month on month decrease of 809 yuan/ton, or 5.33%; The average monthly price of 1.4D direct spinning polyester is 7308 yuan/ton, a month on month decrease of 522 yuan/ton, or 6.66%; The monthly average price of mainstream viscose fiber is 13031 yuan/ton, down 425 yuan/ton month on month 3.16%。 From the perspective of purchase volume, due to the limited export of Xinjiang cotton, cotton spinning enterprises are short of cotton for productio...

 Face mask tensile test machine -Metal Tensile Test Universal Tester Face mask tensile test machine is widely used in rubber and plastic. film. textile. fiber. nanomaterials. Metal is stretched. compression. bending. torn. 90° peel off. 180°peeling. cut. Adhesion force Pull out force. Elongation elongation and other tests. Technical Parameters: Capacity selection: 100, 200, 500N; 1, 2, 3KN Unit switching: kgf, lbf, N, kn, kpa, Mpa Load resolution: ±0.5% Maximum stroke: (without fixture): 600mm Test speed: 0.001-999mm/min Speed accuracy: ±0.5% Displacement Resolution: 0.00004mm Sampling Frequency: 200times/sec Control system: The pulse command control method is adopted to make the control more precise. ps: (WLJCDM809) https://www.standard-groups.com/en/MaterialsTesting/#m

 TPP thermal protection performance tester TPP Thermal Protection Performance Tester) is used to determine the heat transfer of protective clothing or textiles exposed to flame and radiant heat sources. A tester that can provide a thermal protection index (TPI) calculated by software is the recommended tool for evaluating the potential of a material to reburn to prevent convective and radiative heat penetration. The analysis software can display the real-time temperature curve, and automatically detect the heating time curve to display the Stoll curve, so as to rate the thermal protection performance of the tested textile. Standard GB 8965 ISO 17492 NFPA 2112 ASTM F2700 ASTM F2703 CAN / CGSB 155.20 feature 1. Standard calorimeter mounting block. 2. The PLC control system provides stable and fast test performance. 3. The analysis software with friendly user interface is easy to use, and the Stoll curve model is installed inside. 4. The compact structure design reduces the requiremen...

Textile Combustion Constant Temperature Oxygen Index Tester is used to judge the difficulty of burning of materials when they are in contact with flames in the air. It is suitable for homogeneous solid materials, laminated materials, film and film materials. The main parameters: 3.1 Oxygen concentration (oxygen index): digital display direct reading 3.2 Oxygen concentration (oxygen index) sensor: imported from the United States. 3.3 The two pressure gauges provide oxygen output pressure and nitrogen output pressure respectively, and the air pressure can be adjusted through the regulating valve. 3.4 Measuring range: 0-80%, resolution: 0.1L/min 3.5 Measurement accuracy: 2.5 grade 3.6 Combustion cylinder: quartz glass cylinder, inner diameter: 75mm height: 480mm 3.7 Gas velocity at the top of combustion cylinder: 90mm±10mm/s 3.8 Gas flow rate in the combustion tube: 40mm±2mm/s3.9 Input pressure: adjustable from 0.25 to 0.5 Mpa; 3.10 Constant temperature 23℃±2℃ 3.11 Oxygen and nitrogen mi...

MB3000W solar weather testing machine is widely used in rubber, plastics, paints, paints, petrochemicals, automobiles, textiles and other industries for products and materials to test the color fastness to simulated light by solar radiation, the color fastness to light and perspiration, and light aging. By simulating climatic conditions such as light, rain, spray, light and dark, temperature and humidity, etc., the performance changes such as fading, aging, fading, transmittance, peeling, hardening, and softening of material products are measured. 【Standards compliant】: Textile: GB/T8430 GB/T12831 GB/T14576 GB/T8427 GB/T1189 GB/T9344 GB 150.7 GB/T16422.1 GB/T1865 GB/T2423.24 Wood-based panels: AATCCTM16 ASTM G26 ASTM D2565 ASTMD4459 ASTM D6695 ASTM G155 SAE J1885 SAE J2412 SAE J2212 SAE J1960 SAE J2527 AATCC169 Automotive interior: ISO105 ASE J1885KJ ISO11341 ISO4892 ISO03917 ISO11341 ISO 4892-2 Leather: PV 1303 PV 3929 PV 3930 DVM 0067- MA HES D6601 NES M0135 TSL 0601G GMW3414 EDS-T-...

The need for anti-aging equipment to simulate testing textiles under sunlight exposure Some textile applications are very demanding. The textile roofing structure at the Denver Airport is an example. Not just for aesthetic reasons, the fabric it uses must withstand years of sun and rain. Liuchin Technologies serves hundreds of textile manufacturers and textile buyers in a variety of applications, including: apparel fabrics, carpet and floor coverings, military and industrial tent covers, pool covers, curtains, parachutes, automotive interiors, awnings, woven polypropylene bags (FIBC), outdoor furniture, sunscreen, work cloths, and more. Common light stability tests for apparel and design fabrics are run in the LQ-XD programmable xenon lamp aging chamber, which is recognized by all major standards organizations, including ISO and AATCC. Textiles and fabrics that are intended for long-term, outdoor use need to be tested both in the LQ-XD programmable xenon lamp aging chamber and in the L...

Suitable for elastic materials DIN-53516 abrasion resistance testing machine - efficient and convenient DIN-53516 abrasion resistance testing machine is suitable for abrasion testing of elastic materials, rubber, tires, conveyor belts, conveyor belts, soles, soft synthetic leather, leather and other materials. It has the characteristics of high efficiency, good reproducibility and easy operation. technical parameter: Wear stroke 40 mm (20 mm) wear speed 0.32 msec inclination 30 Test piece diameter 16 mm thickness 6~15 mm test load 5N, 10N The lateral displacement of the fixture is 4.2mm/the volume of each roller is 70×30×30cm Weight 65kg Power supply 15, AC220V, 3A 1.4 Operating environment The instrument is intended for use in residential, commercial and light industrial environments and complies with standards BS EN 50081-1 and BS EN50082-1 1.5 Climate and environment The right to make changes and improvements to its products, but has no obligation to implement improvements and inst...

Rubber Din Abrasion Tester Instructions for Use and Caution Under a specified contact pressure and a given area, the sample is held at a certain angle to the sandpaper and the amount of wear produced by rubbing the sample on a certain grade of sandpaper is measured. Sandpaper is wrapped around the surface of the drum, and the sample is pressed against the drum with the sandpaper, causing the sample to move laterally along the drum. The wear occurs at one end of the cylindrical sample, the mass loss of the sample is measured and the volume wear is calculated from the density of the sample. The tester meets the requirements of DIN-53516, ISO/DIS-4649, BS 903 part 9 and GB-9867. Test piece load:2.5n±0.2 n5n±0.2n Roller diameter:φ(150±0.2)mm Roller length:460mm Stroke:40m(84rpm)/20m(42rpm) Wear speed:0.32m/sec Volume(approx.) :70cm × 30cm × 30cm Weight(approx.) :50kg Power supply:1∮ AC 220 volt 3A (according to the country or name) Instructions for use: 1.Power conditions::Please configure...

 Климатическая испытательная камера с ксеноновой лампой имеет функцию Эта испытательная камера для ксеноновой лампы aging_sunlight атмосферостойкая испытательная камера для ксеноновой лампы разработана и изготовлена строго в соответствии с техническими параметрами GB/T 16422.2-99. Также в соответствии с ASTMG155, ISO10SB02/B04, SAEJ2527, SAEJ2421 и другими стандартами. 1. Ксеноновая лампа полного спектра. 2、Разнообразие альтернативных систем фильтрации. 3, контроль солнечной радиации глаз. 4. Функция распыления воды. 5, контроль относительной влажности. 6, классная доска / или система контроля температуры воздуха в тестовой камере. 7, чтобы удовлетворить требования метода испытаний. 8, фиксированная рама неправильной формы. 9, недорогая сменная ксеноновая лампа. Погодостойкая испытательная камера с ксеноновой лампой имитирует полный спектр солнечного света источников света. Оборудование, использующее полный спектр ксеноновой дуговой лампы для имитации разрушительных световых волн н...